How to Replace a Shock Absorber in a Suspension Strut Assembly on 2005 Chevrolet Cobalt?

The strut replacement process starts with removing the upper mounting nuts of the strut. Use only a frame-contact vehicle lift to raise the vehicle while following proper support strategies. Start by detaching the tire and wheel and subsequently remove the stabilizer shaft link from the strut assembly. The next steps in the process begin with disconnecting all lower strut bolts and nuts before removing the antilock brake system (ABS) wiring bracket if present before taking out the strut component. During installation you must install the strut followed by the strut upper mounting nuts then tighten them to 20 nm (15 ft. Lbs.). The fastener should be reused only when both elements are clean and free of rust and the fastener reaches 3 nm (27 inch lbs.) of static torque against its counterpoint during installation. Otherwise, replace the fastener. Install strut lower bolts and nuts along with the abs wiring bracket when present; tighten strut lower nuts to 120 nm (89 ft. Lbs.). Secure the stabilizer shaft link onto the strut assembly by torquing the stabilizer shaft link nut to 65 nm (48 ft. Lbs.). After installation of the tire along with its wheel you should lower the vehicle and proceed with front wheel alignment.

OEM 2005 Chevrolet Cobalt Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2005 Chevrolet Cobalt Strut, Front Driver Side
Part Number: 20794267
$143.57 MSRP: $259.84
You Save: $116.27 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15247243, 88964331, 15798897, 15876215
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.2 x 8.2 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Strut, Front Passenger Side
Part Number: 20794268
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15876216, 15247244, 15798898
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.5 x 9.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Shock Absorber
Part Number: 22696400
$79.28 MSRP: $141.58
You Save: $62.30 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.5 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22696400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Shock Absorber
Part Number: 10368516
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.3 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10368516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Strut, Driver Side
Part Number: 19181251
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Driver Side
- Replaces: 15247245, 19181044
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.2 x 8.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Strut, Passenger Side
Part Number: 19181631
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Passenger Side
- Replaces: 15247246, 19181043
- Item Weight: 8.20 Pounds
- Item Dimensions: 9.1 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Chevrolet Cobalt Shock Absorber
Part Number: 22728821
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Shock Absorber Set; Strut Shock Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.50 Pounds
- Item Dimensions: 19.1 x 5.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22728821
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2005 Chevrolet Cobalt Shock Absorber

With a comprehensive array of OEM 2005 Chevrolet Cobalt Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cobalt Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cobalt Shock Absorber Parts Questions & Experts Answers

Q: How to Replace a Shock Absorber in a Suspension Strut Assembly on 2005 Chevrolet Cobalt?
A: The strut replacement process starts with removing the upper mounting nuts of the strut. Use only a frame-contact vehicle lift to raise the vehicle while following proper support strategies. Start by detaching the tire and wheel and subsequently remove the stabilizer shaft link from the strut assembly. The next steps in the process begin with disconnecting all lower strut bolts and nuts before removing the antilock brake system (ABS) wiring bracket if present before taking out the strut component. During installation you must install the strut followed by the strut upper mounting nuts then tighten them to 20 nm (15 ft. Lbs.). The fastener should be reused only when both elements are clean and free of rust and the fastener reaches 3 nm (27 inch lbs.) of static torque against its counterpoint during installation. Otherwise, replace the fastener. Install strut lower bolts and nuts along with the abs wiring bracket when present; tighten strut lower nuts to 120 nm (89 ft. Lbs.). Secure the stabilizer shaft link onto the strut assembly by torquing the stabilizer shaft link nut to 65 nm (48 ft. Lbs.). After installation of the tire along with its wheel you should lower the vehicle and proceed with front wheel alignment.