How to replace the left engine mount on 2005 Chevrolet Express 3500?

The first step for left Engine Mount replacement involves lifting the car and wheel removal sequence. Before beginning the replacement of left-engine mounts for 4wd vehicles it is essential to first remove the front propeller shaft. Consolidate access to the Engine Mount and frame mounting bolts through the wheelwell and uninstall them from their positions. The use of a jack underneath the Oil Pan sheet metal or crankshaft balancer for engine lifting creates damage potential thus maintain the jack at the square tab on the engine block rear for mount removal. The tasks begin with unscrewing front Engine Mount to engine mounting bolts through the wheelwell before moving to the rear Engine Mount to engine mounting bolts below the vehicle before completely removing the Engine Mount from the vehicle. You should first position the Engine Mount into the vehicle before installing the rear Engine Mount to engine mounting bolts from under the vehicle without tightening them. Then use the wheelwell to mount the front engine bolts to the engine while using 50 nm (37 ft. Lbs.) torque setting. Drive the vehicle down to position the engine at the right height subsequently fasten the Engine Mount to frame bolts at the wheelwell with 60 nm torque (44 ft lbs torque). After putting back the front propeller shaft, customers need to reattach the tire and wheel before lowering the vehicle for all 4wd models.

OEM 2005 Chevrolet Express 3500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
2005 Chevrolet Express 3500 Mount Bracket, Passenger Side Part Number: 20886358
$119.13 MSRP: $187.46
You Save: $68.33 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25752966
- Item Weight: 7.20 Pounds
- Item Dimensions: 10.6 x 8.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20886358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Express 3500 Mount Bracket, Driver Side Part Number: 20886359
$115.59 MSRP: $181.86
You Save: $66.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Replaces: 25752967
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.1 x 5.7 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20886359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Express 3500 Motor Mount Part Number: 25863822
$113.33 MSRP: $192.95
You Save: $79.62 (42%)
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 21998155, 25743244
- Item Weight: 5.10 Pounds
- Item Dimensions: 7.9 x 7.7 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25863822
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Express 3500 Motor Mount, Driver Side Part Number: 21998156
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 25743245
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 7.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21998156
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS

2005 Chevrolet Express 3500 Engine Mount

With a comprehensive array of OEM 2005 Chevrolet Express 3500 Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Express 3500 Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Express 3500 Engine Mount Parts and Q&A

Q: How to replace the left engine mount on 2005 Chevrolet Express 3500?
A: The first step for left Engine Mount replacement involves lifting the car and wheel removal sequence. Before beginning the replacement of left-engine mounts for 4wd vehicles it is essential to first remove the front propeller shaft. Consolidate access to the Engine Mount and frame mounting bolts through the wheelwell and uninstall them from their positions. The use of a jack underneath the Oil Pan sheet metal or crankshaft balancer for engine lifting creates damage potential thus maintain the jack at the square tab on the engine block rear for mount removal. The tasks begin with unscrewing front Engine Mount to engine mounting bolts through the wheelwell before moving to the rear Engine Mount to engine mounting bolts below the vehicle before completely removing the Engine Mount from the vehicle. You should first position the Engine Mount into the vehicle before installing the rear Engine Mount to engine mounting bolts from under the vehicle without tightening them. Then use the wheelwell to mount the front engine bolts to the engine while using 50 nm (37 ft. Lbs.) torque setting. Drive the vehicle down to position the engine at the right height subsequently fasten the Engine Mount to frame bolts at the wheelwell with 60 nm torque (44 ft lbs torque). After putting back the front propeller shaft, customers need to reattach the tire and wheel before lowering the vehicle for all 4wd models.