Make sure this part fits

GM 25863822
Motor Mount

2003-2020 GM

Customer Questions & Expert Answers (36)
GM 25863822 Motor Mount
  • Part Description
    Mount Assembly-Engine; Engine Mount Bracket; Engine Mount
  • Replaces
    21998155, 25743244
  • Manufacturer
    General Motors
Make sure this part fits
$133.57 MSRP: $210.16
You Save: $76.59 (37%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2020 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2020 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2014 GMC Savana 1500Base, LS, LT, SLE8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2020 GMC Savana 2500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2020 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25863822 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25863822 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new engine mount be installed for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Position the engine mount back into the vehicle and secure it with the engine mounting bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the installation process for the new engine mount for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Place the engine mount back into the vehicle and secure it to the engine mounting bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the new transmission mount be installed for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Position the new transmission mount in place and install the mounting bolts for 4WD vehicles, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for tightening the engine mount to the frame mounting bolts for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Tighten them to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed for 4WD for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the mounting bolts for 4WD vehicles, and then take out the transmission mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be used to support the transmission for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    A transmission jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the transmission mount mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after tightening the front engine mount for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Lower the engine and install the engine mount to the frame mounting bolts through the wheel well, tightening to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed next for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the transmission support and the transmission mount mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the transmission be supported during the replacement for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Use a transmission jack to support the transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right engine mount for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the transmission jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done with the engine mount to the frame mounting bolts for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Take out the engine mount to the frame mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you remove the engine mount to the frame mounting bolts for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the bolts through the wheel well, ensuring not to use a jack under the oil pan, sheet metal, or crankshaft balancer to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step for installation for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    Position the engine mount back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in removing the engine mount for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Take out the engine mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after supporting the transmission for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the transmission support crossmember.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed next for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the transmission mount mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How much should the engine be raised for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Raise the engine only enough to allow for the removal of the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the new transmission mount be installed for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Position the new transmission mount in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What are the final steps for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the front propeller shaft, followed by the tire and wheel, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Position the engine mount back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the bolts for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Install the bolts for RWD vehicles, also tightening them to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after reinstalling the mounting bolts for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the transmission support, remove the transmission jack, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after supporting the transmission for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Remove the transmission support crossmember.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the right engine mount for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you remove the engine mount to the frame mounting bolts for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Remove the bolts through the wheelwell, ensuring not to use a jack under the oil pan, any sheet metal, or crankshaft balancer to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the engine mount to the engine for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Lower the engine and then install the engine mount to the frame mounting bolts, tightening them to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be used to support the transmission for the 2006 GMC Savana 3500? Posted by Customer
    A:
    A transmission jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step for installation for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Place the engine mount back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after installing the rear engine mount for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Install the front engine mount to the engine mounting bolts through the wheel well, tightening them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What components need to be removed before accessing the engine mount for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Remove the starter and the right side exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step for 4WD for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Remove the mounting bolts for 4WD vehicles and take out the transmission mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the transmission mount on a 4L80-E/4L85-E for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Raise and support the vehicle, then support the transmission with a transmission jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Motor Mount 25863822 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25863822 Motor Mount is available in the market under the name GM Engine Mount, Motor And Transmission Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25863822 Motor Mount fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25863822 maintains top performance when functioning as the Mount Assembly-Engine; Engine Mount Bracket; Engine Mount unit. The component 25863822 is constructed from durable material and its dimensions span 7.9 x 7.7 x 7.5 inches while weighing 5.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting. The part 25863822 has available replacement options 21998155, 25743244. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.