ChevyParts
My Garage
My Account
Cart
OEM 2005 Chevrolet Impala ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 ABS Control Modules found
Product Specifications- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078136
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 6.2 x 5.3 inches
- Condition: New
- SKU: 12221450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078143
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 6.2 x 5.1 inches
- Condition: New
- SKU: 12221451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078134
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.2 x 6.1 x 5.2 inches
- Condition: New
- SKU: 12238943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 12201160, 12221450, 12214520
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.4 x 6.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18078136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 12201157, 12214200, 12221451
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 6.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18078143
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Impala ABS Control Module
With a comprehensive array of OEM 2005 Chevrolet Impala ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Impala ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Chevrolet Impala Parts Questions & Experts Answers
- Q: How to replace the ABS Control Module on 2005 Chevrolet Impala?A: Start the ABS Control Module replacement by setting the ignition switch to off because this prevents equipment damage. The 3.8l engine fuel injector sight shield removal should be the first step before disconnecting the front fender upper diagonal brace. After disconnecting the accelerator and cruise control cable from the accelerator control cable bracket the technician must separate the Cruise Control Module from the left strut tower while keeping the cable intact before setting aside the module along with the cables. Proceed by taking off the air cleaner intake duct and deactivating the red locking tab from the connector lock tab before you push down the lock tab to open the sliding connector cover for ABS Control Module harness connector disconnection. Clean the assembly surface before removing the 4 ABS Control Module to brake pressure modulator valve (BPMV) retainers with a goal to avoid damaging the bpmv surface or solenoid valves when separating them. The installation procedure requires users to connect the ABS Control Module to the bpmv before tightening all 4 retainers to 5 nm (44 inch lbs.). The ABS Control Module harness connector should be plugged in after pressing down the lock tab and repositioning the sliding connector cover to its locked state. Then attach the air cleaner intake duct and reinstall both module and cables before connecting the Cruise Control Module to the left strut tower. After connecting the accelerator and cruise control cable to the accelerator control cable bracket, proceed with installing both the front fender upper diagonal brace and fuel injector sight shield along with the 3.8l engine. To conclude the procedure turn the key switch to the run position while keeping all engine activation blocked. Proceed with the diagnostic system check - vehicle.
Related 2005 Chevrolet Impala Parts
2005 Chevrolet Impala Wheel Bearing
2005 Chevrolet Impala Wheel Hub
2005 Chevrolet Impala Brake Backing Plate
2005 Chevrolet Impala Brake Caliper Bracket
2005 Chevrolet Impala Brake Caliper Repair Kit
2005 Chevrolet Impala Brake Calipers
2005 Chevrolet Impala Brake Pad
2005 Chevrolet Impala Brake Proportioning Valve
2005 Chevrolet Impala Hydraulic Hose
2005 Chevrolet Impala Parking Brake Cable
2005 Chevrolet Impala Parking Brake Shoe
2005 Chevrolet Impala Wheel Hub Bolt