ChevyParts
My Garage
My Account
Cart
OEM 2004 Chevrolet Impala ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 ABS Control Modules found
Product Specifications- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078136
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 6.2 x 5.3 inches
- Condition: New
- SKU: 12221450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078143
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 6.2 x 5.1 inches
- Condition: New
- SKU: 12221451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake & Traction Control; ABS Control Module
- Replaced by: 18078134
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.2 x 6.1 x 5.2 inches
- Condition: New
- SKU: 12238943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 12201160, 12221450, 12214520
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.4 x 6.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18078136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Replaces: 12201157, 12214200, 12221451
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 6.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18078143
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Chevrolet Impala ABS Control Module
With a comprehensive array of OEM 2004 Chevrolet Impala ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Impala Parts Questions & Experts Answers
- Q: How to replace the ABS Control Module on 2004 Chevrolet Impala?A: You need to start the ABS Control Module replacement by setting the ignition key to off to avoid equipment destruction. First remove the 3.8 l engine fuel injector sight shield while then taking away the front fender upper diagonal brace. Disconnect the accelerator and cruise control cable from the accelerator control cable bracket while leaving the cable connected to the left strut tower before moving all parts aside. Start by separating the air cleaner intake duct alongside removing the red locking tab from the connector lock tab. Lower the lock tab position. The ABS Control Module harness connector can be disconnected through the open connector sliding cover. Carefully remove all debris from the assembly before removing the four ABS Control Module to bpmv retainers using appropriate hands because using tools could damage the solenoid valves and bpmv surface. Remove the ABS Control Module from its contact position with the bpmv while exercising light force. To mount the ABS Control Module on the bpmv use four retainers while tightening them to 5 nm (44 inch lbs.). Complete the ABS Control Module harness connector connection process by lowering the lock tab before moving the sliding connector cover back into its locked position with the red locking tab securely engaged. Then install the air cleaner intake duct followed by correct positioning of the module and cables before connecting the Cruise Control Module to the left strut tower. Reinstall the accelerator and cruise control cable onto the accelerator control cable bracket while installing the front fender upper diagonal brace and the fuel injector sight shield that belongs to the 3.8 l engine. Use the ignition switch to turn the vehicle to run mode but leave the engine off then run the diagnostic system check - abs.
Related 2004 Chevrolet Impala Parts
2004 Chevrolet Impala Wheel Bearing
2004 Chevrolet Impala Wheel Hub
2004 Chevrolet Impala Brake Backing Plate
2004 Chevrolet Impala Brake Caliper Bracket
2004 Chevrolet Impala Brake Caliper Repair Kit
2004 Chevrolet Impala Brake Calipers
2004 Chevrolet Impala Brake Pad
2004 Chevrolet Impala Brake Proportioning Valve
2004 Chevrolet Impala Hydraulic Hose
2004 Chevrolet Impala Parking Brake Cable
2004 Chevrolet Impala Parking Brake Shoe
2004 Chevrolet Impala Wheel Hub Bolt