How to replace the rear parking brake cable on 2004 Chevrolet Impala?

The first step to change the rear park brake cable begins with raising the vehicle and securing it for adequate support. First apply pressure release on the park brake cable located at the equalizer before disconnecting both the front cable end from the defective rear cable. The right rear cable requires cable disconnection from the clip while complete removal of the equalizer nut off its equalizer stud applies to the left rear cable. The retainer holding the cable to the support bracket can be detached using Parking Brake Cable Release Tool (J 37043). You should first disconnect the actuator lever from the park brake cable and remove its retaining pin from the support bracket before extracting the cable. The new park brake cable requires positioning into the support bracket before installing the cable retaining pin. Refasten the park brake cable to the actuator lever and retrace the retainer installation on the support bracket before uniting the rear cable with the front cable. The right rear cable should attach to the clip and the left rear cable requires installation of the equalizer stud onto its corresponding equalizer nut that belongs to the equalizer assembly. To complete the task adjust the park brake then lower the vehicle.

OEM 2004 Chevrolet Impala Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2004 Chevrolet Impala Parking Brake Cable, Driver Side
Part Number: 15242626
$31.82 MSRP: $57.58
You Save: $25.76 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Driver Side
- Replaces: 10405321, 10310911
- Item Weight: 0.70 Pounds
- Item Dimensions: 11.6 x 11.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15242626
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Chevrolet Impala Parking Brake Cable, Passenger Side
Part Number: 15297496
$28.38 MSRP: $46.72
You Save: $18.34 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Passenger Side
- Replaces: 10310910
- Item Weight: 0.70 Pounds
- Item Dimensions: 31.2 x 9.8 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15297496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2004 Chevrolet Impala Front Cable
Part Number: 15297497
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 10310909, 25919312
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.6 x 10.9 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15297497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2004 Chevrolet Impala Parking Brake Cable

With a comprehensive array of OEM 2004 Chevrolet Impala Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the rear parking brake cable on 2004 Chevrolet Impala?
A: The first step to change the rear park brake cable begins with raising the vehicle and securing it for adequate support. First apply pressure release on the park brake cable located at the equalizer before disconnecting both the front cable end from the defective rear cable. The right rear cable requires cable disconnection from the clip while complete removal of the equalizer nut off its equalizer stud applies to the left rear cable. The retainer holding the cable to the support bracket can be detached using Parking Brake Cable Release Tool (J 37043). You should first disconnect the actuator lever from the park brake cable and remove its retaining pin from the support bracket before extracting the cable. The new park brake cable requires positioning into the support bracket before installing the cable retaining pin. Refasten the park brake cable to the actuator lever and retrace the retainer installation on the support bracket before uniting the rear cable with the front cable. The right rear cable should attach to the clip and the left rear cable requires installation of the equalizer stud onto its corresponding equalizer nut that belongs to the equalizer assembly. To complete the task adjust the park brake then lower the vehicle.