Make sure this part fits

GM 15297496
Parking Brake Cable, Passenger Side

2000-2010 GM

Customer Questions & Expert Answers (22)
GM 15297496 Parking Brake Cable, Passenger Side
GM 15297496 Parking Brake Cable, Passenger Side
  • Part Description
    Cable, Parking Brake; Brake Cable
  • Position
    Passenger Side
  • Replaces
    10310910
  • Manufacturer
    General Motors
Make sure this part fits
$28.38 MSRP: $46.72
You Save: $18.34 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2008-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2001-2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    2000-2010 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2001-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS
    2006-2008, 2001-2003 Pontiac Grand PrixBase, GT, GTP, GXP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15297496 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15297496 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the parking brake cable for the 2001 Buick Century? Posted by Customer
    A:
    Fold back the carpeting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you remove the cable end from the caliper lever for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Depress the tab through the caliper lever window with a screwdriver while tilting the cable elbow toward the front of the vehicle, then slide the cable end up and out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What are the final steps after installing the rear park brake cable for the 2002 Buick Century? Posted by Customer
    A:
    Adjust the park brake, install the rear brake drum, put the rear tire and wheel back on, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you attach the park brake cable after installation for the 2003 Buick Century? Posted by Customer
    A:
    Attach the park brake cable to the actuator lever, reconnect the retainer to the support bracket, and connect the rear cable to the front cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How should the opposite end of the cable be fed for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Feed it through the wheel opening toward the rear support assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the process for the left rear cable for the 2001 Buick Century? Posted by Customer
    A:
    Fully remove the equalizer nut from the equalizer stud, which is part of the left rear cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the next step after lowering for the 2002 Buick Regal? Posted by Customer
    A:
    Remove the cable button end from the parking brake lever clevis.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you secure the cable to the clevis during installation for the 2004 Buick Regal? Posted by Customer
    A:
    Insert the cable button end into the clevis and secure it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you disconnect the rear cable from the front cable for the 2001 Buick Regal? Posted by Customer
    A:
    For the right rear cable, disconnect the cable from the clip; for the left rear cable, fully remove the equalizer nut from the equalizer stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be done after relieving the tension for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the front cable from the rear cable being replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What tool is used to disconnect the retainer holding the cable to the support bracket for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Use the Parking Brake Cable Release Tool (J 37043).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be removed after the left side instrument panel insulator for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the left side carpet retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you install the new parking brake cable for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Position the new cable and attach it to the actuator lever and the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What are the next steps after disconnecting the retainer for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the park brake cable from the actuator lever, remove the cable retaining pin from the support bracket, and take out the park brake cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the procedure after lowering for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the cable button end from the parking brake lever clevis and then remove the front cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you reconnect the rear cable to the front cable for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Connect the rear cable to the front cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What should be inspected during the parking brake test for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Apply the parking brake to four clicks and inspect the rotation of the rear wheels, ensuring they do not rotate forward and either drag or do not rotate backward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you install the new front cable for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Insert the front cable into the vehicle and connect it to the parking brake lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the next step after disconnecting the cable from the support bracket for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the park brake cable from the actuator lever, remove the cable retaining pin from the support bracket, and take out the park brake cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the last action to complete the process for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Adjust the parking brake.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you connect the rear cable to the front cable for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Connect the rear cable to the front cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Parking Brake Cable, Passenger Side 15297496 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15297496 Parking Brake Cable, Passenger Side is available in the market under the name GM Parking Brake Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15297496 Parking Brake Cable, Passenger Side fits certain Chevrolet Impala, Monte Carlo models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Intrigue models.
The original GM component designated by manufacturer part number 15297496 maintains top performance when functioning as the Cable, Parking Brake; Brake Cable unit at its Passenger Side. The component 15297496 is constructed from durable material and its dimensions span 31.2 x 9.8 x 1.2 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Cable. The part 15297496 has available replacement options 10310910. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.