How to service and adjust the parking brake cable on Chevrolet Impala?

The processing starts with rear Brake Shoe and lining adjustment when servicing the Parking Brake Cable. Verify the parking brake pedal complete release by applying and fully releasing it six times. Start the engine while checking the brake indicator is off. If the light stays on check that the parking brake pedal is in release position and fully extended before adjusting the front Parking Brake Cable with downward tension. Rise the vehicle before adequately supporting it. Switch the equalizer nut while simultaneously spinning both rear tires until one of them begins to drag and then turn the nut one full turn backward. Lower the front edge of the vehicle until it reaches the curb height. A test of the rear wheels during this procedure requires you to modify both parking brake shoes and linings. Check the rear wheel rotation by applying the parking brake to four clicks while examining that the wheels neither advance forward nor default to drag nor move backward. Proceed with lowering the vehicle after checking that all wheels freely spin following the release of the parking brake.

How to replace the front parking brake cable on Chevrolet Impala?

The replacement process starts by taking off the left side instrument panel insulator and moving on to remove the left side carpet retainers together with the lower center pillar trim panel found on the left side. To reach the parking brake cable the carpet must be folded away before removal from its cable guides. First lift the vehicle properly and afterward disconnect the brake cable at the equalizer. Start by lowering the vehicle and take off the cable button end and then the front cable from their positions on the vehicle. The installation process begins with cable front insertion into the vehicle followed by its attachment to parking brake lever. Fasten the cable button inside the lever clevis by applying the cable button clip. The vehicle must be correctly raised together with support before securing the equalizer nut tightly to reduce the cable tension which will be followed by lowering the vehicle. The park brake cable needs installation through its guides before carpet repositioning then the lower center pillar trim panel of the left side until left side carpet retainers and left side instrument panel insulator replacement. Finally, adjust the parking brake.

OEM Chevrolet Impala Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Parking Brake Cables found

View related parts
Chevrolet Impala Rear Cable Part Number: 23227766
$54.49 MSRP: $106.71
You Save: $52.22 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Parking Brake; Brake Cable; Cable, Parking Brake
- Replaces: 13261156, 22821392, 22944243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Parking Brake Cable, Driver Side Part Number: 15242626
$31.82 MSRP: $57.58
You Save: $25.76 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Driver Side
- Replaces: 10405321, 10310911
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Parking Brake Cable, Passenger Side Part Number: 15297496
$28.38 MSRP: $46.72
You Save: $18.34 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Passenger Side
- Replaces: 10310910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 25502686
$18.64 MSRP: $37.42
You Save: $18.78 (51%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking Brake Rear; Brake Cable; Cable, Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 22797692
$24.75 MSRP: $46.50
You Save: $21.75 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Front Cable Part Number: 22756516
$31.20 MSRP: $58.61
You Save: $27.41 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake
- Position: Front
- Replaces: 25919311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Rear Cable Part Number: 22797693
$23.67 MSRP: $44.46
You Save: $20.79 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Rear Cable Part Number: 10223644
Product Specifications
- Other Name: Cable; Brake Cable; Cable, Parking Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10080807
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Front Cable Part Number: 25502768
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Cable Assembly, Parking Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10223645
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10223642
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10223643
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Front Cable Part Number: 15297497
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 10310909, 25919312
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Front Cable Part Number: 10080806
Product Specifications
- Other Name: Cable Assembly; Brake Cable; Cable, Parking Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Front Cable Part Number: 10205034
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 25502772
Product Specifications
- Other Name: Cable Assembly, Parking Brake Rear; Brake Cable; Cable, Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10080808
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Impala | Base | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10135482
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Rear Cable Part Number: 10113038
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Parking Brake Cable

Want to cut long-term maintenance and repair costs? Choose OEM Parking Brake Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Parking Brake Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala parking brake cable is one of the many imperative parts that guarantees that the vehicle does not move when parked especially on a slope or an incline. This important cable links the parking brake to the rest of the brake system so that the parking brakes can be properly activated. Being one of the most trusted vehicles in the world, Chevrolet Impala parking brake cable has been manufactured to the safety and performance requirements of the model that was first introduced in 1958 until its last generation in 2020. It would be wise to pay particular attention to the Parking Brake Cable as stretching or wearing of the cable may result to inadequate force for braking or even total failure which may cause some level of danger. The Chevrolet Impala has a long history of being a full-sized sedan with potent power plants and sophisticated transmissions boosting that aspect of the car. The Parking Brake Cable has a large part to play in this efficiency and safety and is responsible for the proper working of the parking brake of the vehicle. Hence the car part Chevrolet Impala Parking Brake Cable has a long working life and ensures accurate functioning because of its specificity and quality. This makes it a preferable model is the automotive market, thus enhancing the Chevrolet Impala features of performance, safety, and reliability. Finally, the subject under the consideration, the Chevrolet Impala Parking Brake Cable, demonstrates that Chevrolet Impala is all about quality and new technologies, staying loyal to itself and guaranteeing each car's safe driving experience.

Chevrolet Impala Parking Brake Cable Parts and Q&A

Parking Brake Cable, Passenger Side
15297496
Q: How to service and adjust the parking brake cable on Chevrolet Impala?
A:
The processing starts with rear Brake Shoe and lining adjustment when servicing the Parking Brake Cable. Verify the parking brake pedal complete release by applying and fully releasing it six times. Start the engine while checking the brake indicator is off. If the light stays on check that the parking brake pedal is in release position and fully extended before adjusting the front Parking Brake Cable with downward tension. Rise the vehicle before adequately supporting it. Switch the equalizer nut while simultaneously spinning both rear tires until one of them begins to drag and then turn the nut one full turn backward. Lower the front edge of the vehicle until it reaches the curb height. A test of the rear wheels during this procedure requires you to modify both parking brake shoes and linings. Check the rear wheel rotation by applying the parking brake to four clicks while examining that the wheels neither advance forward nor default to drag nor move backward. Proceed with lowering the vehicle after checking that all wheels freely spin following the release of the parking brake.
Parking Brake Cable, Driver Side
15242626
Q: How to replace the front parking brake cable on Chevrolet Impala?
A:
The replacement process starts by taking off the left side instrument panel insulator and moving on to remove the left side carpet retainers together with the lower center pillar trim panel found on the left side. To reach the parking brake cable the carpet must be folded away before removal from its cable guides. First lift the vehicle properly and afterward disconnect the brake cable at the equalizer. Start by lowering the vehicle and take off the cable button end and then the front cable from their positions on the vehicle. The installation process begins with cable front insertion into the vehicle followed by its attachment to parking brake lever. Fasten the cable button inside the lever clevis by applying the cable button clip. The vehicle must be correctly raised together with support before securing the equalizer nut tightly to reduce the cable tension which will be followed by lowering the vehicle. The park brake cable needs installation through its guides before carpet repositioning then the lower center pillar trim panel of the left side until left side carpet retainers and left side instrument panel insulator replacement. Finally, adjust the parking brake.