How to replace the rear disc brake backing plate on Chevrolet Impala?

The process starts by raising and supporting the vehicle before removing the rear wheels followed by the tires. Start by reducing the tension on the park brake system at the equalizer assembly before removing the rear caliper bracket and the rear rotor. Disconnect the rear park brake cable from its bracket at the rear wheel then detach the park brake cable return spring from the park brake actuator and bracket at the rear wheel. The removal step includes the rear hub assembly in combination with the rear hub along with the backing plate and park brake cable bracket and park brake actuator hardware. After separating the two retainers and the park brake cable bracket from the park brake actuator you can place the rear hub to the side. Take out the park brake shoe and actuator from the backing plate position. Begin by putting the park brake shoe and actuator assembly on the backing plate before fitting it on the rear hub. Begin assembly by first installing the park brake cable bracket and the two retainers , then install the complete rear hub assembly. The rear park brake cable should be wired to the bracket that resides at the wheel while the park brake cable return spring should be attached to the park brake actuator and rear wheel bracket. Put the rear rotor and rear caliper bracket together before adding the rear wheels mounted with tires. Lower the vehicle after adjusting the park brake at the equalizer.

OEM Chevrolet Impala Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Brake Backing Plates found

View related parts
Chevrolet Impala Splash Shield, Front Passenger Side
Part Number: 22810891
$10.74 MSRP: $20.16
You Save: $9.42 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 13230783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Backing Plate, Rear Passenger Side
Part Number: 20941794
$11.48 MSRP: $21.54
You Save: $10.06 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Replaces: 13237776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Backing Plate, Front Driver Side
Part Number: 25816682
$56.31 MSRP: $109.29
You Save: $52.98 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 88965639, 88967265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Backing Plate, Front Passenger Side
Part Number: 25816681
$56.31 MSRP: $109.30
You Save: $52.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 88965640, 88967266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Splash Shield, Front Driver Side
Part Number: 22810890
$10.77 MSRP: $20.22
You Save: $9.45 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 13230782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Backing Plate, Rear Driver Side
Part Number: 20941793
$11.48 MSRP: $21.54
You Save: $10.06 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Driver Side
- Replaces: 13237775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Backing Plate, Driver Side
Part Number: 25990085
Product Specifications
- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Backing Plate, Rear Driver Side
Part Number: 25990034
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Driver Side
- Replaces: 18060430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Backing Plate, Rear Passenger Side
Part Number: 25990033
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Replaces: 18060431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Splash Shield, Passenger Side
Part Number: 344024
Product Specifications
- Other Name: Shield Assembly-Front Disc Brake Splash Right-Hand; Brake Dust Shield; Shield; Shield, Brake Flange Plate
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Splash Shield, Driver Side
Part Number: 344023
Product Specifications
- Other Name: Shield Assembly-Front Disc Brake Splash Left-Hand; Brake Dust Shield; Shield; Shield, Brake Flange Plate
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Backing Plate, Rear Driver Side
Part Number: 18014440
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Backing Plate, Passenger Side
Part Number: 25990084
Product Specifications
- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Splash Shield, Passenger Side
Part Number: 18017511
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Splash Shield, Driver Side
Part Number: 18017510
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Backing Plate
Part Number: 18013844
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Backing Plate, Rear Driver Side
Part Number: 18012021
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Backing Plate
Part Number: 18002392
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS

Chevrolet Impala Brake Backing Plate

Our website offers an extensive catalog of genuine Chevrolet Impala Brake Backing Plate at unbeatable prices. Every OEM Chevrolet Impala Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Brake Backing Plate Parts Questions & Experts Answers

Backing Plate, Passenger Side
25990084
Q: How to replace the rear disc brake backing plate on Chevrolet Impala?
A: The process starts by raising and supporting the vehicle before removing the rear wheels followed by the tires. Start by reducing the tension on the park brake system at the equalizer assembly before removing the rear caliper bracket and the rear rotor. Disconnect the rear park brake cable from its bracket at the rear wheel then detach the park brake cable return spring from the park brake actuator and bracket at the rear wheel. The removal step includes the rear hub assembly in combination with the rear hub along with the backing plate and park brake cable bracket and park brake actuator hardware. After separating the two retainers and the park brake cable bracket from the park brake actuator you can place the rear hub to the side. Take out the park brake shoe and actuator from the backing plate position. Begin by putting the park brake shoe and actuator assembly on the backing plate before fitting it on the rear hub. Begin assembly by first installing the park brake cable bracket and the two retainers , then install the complete rear hub assembly. The rear park brake cable should be wired to the bracket that resides at the wheel while the park brake cable return spring should be attached to the park brake actuator and rear wheel bracket. Put the rear rotor and rear caliper bracket together before adding the rear wheels mounted with tires. Lower the vehicle after adjusting the park brake at the equalizer.