Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25990085
Backing Plate, Driver Side

1997-2010 GM

Customer Questions & Expert Answers (9)
GM 25990085 Backing Plate, Driver Side
GM 25990085 Backing Plate, Driver Side
GM 25990085 Backing Plate, Driver Side
  • Part Description
    Shield-Parking Brake Actuator Splash; Brake Dust Shield
  • Position
    Driver Side
  • Replaces
    18022582
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25990085 Backing Plate, Driver Side is Ref No. 12 in the diagram below

    2001 Chevy Impala Backing Plate, Driver Side Diagram for 25990085
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25990085

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2003 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2010 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25990085 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25990085 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear disc brake backing plate on Chevrolet Monte Carlo? Posted by Customer
    A:
    You must lift the vehicle before starting work to access the disc Brake Backing Plate for replacement. To begin work on the brake system release the park brake pressure at the equalizer before removing the bracket and rotor at the rear. Unclip and take out the rear park brake cable from its bracket on the wheel. Also disconnect the park brake cable return spring from the park brake actuator and wheel bracket. The technician should take out all parts of the rear hub including the hub itself plus backing plate and park brake components as an assembly. The two retainers must come off along with the park brake cable bracket to release the park brake actuator. Place the entire rear hub assembly to the side afterward. Take out the Parking Brake Shoe and actuator unit from the back plate. First put the park brake actuator and shoe on the backing plate before you set the complete assembly over the hub. To complete the installation secure the two retainers and the park brake cable bracket first then fit the rear hub. Reattach the rear park brake cable to its bracket at the wheel base and snap the park brake cable return spring onto its positions at both the wheel base and park brake actuator. First put on the rear rotor then install the rear caliper bracket and lastly put on the rear wheels and tires at their appropriate positions. Set the park brake to its correct position at the equalizer before putting down the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2001 Buick Regal? Posted by Customer
    A:
    Adjust the park brake at the equalizer and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be installed after the park brake support plate for the 2000 Buick Regal? Posted by Customer
    A:
    Install the park brake shoe, and then the rear wheel hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after installing the brake drum for the 2001 Buick Regal? Posted by Customer
    A:
    Bleed the brake hydraulic system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after removing the rear wheels and tires for the 2004 Buick Century? Posted by Customer
    A:
    Relieve the park brake system tension at the equalizer assembly, then remove the rear caliper bracket and the rear rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after disconnecting the park brake cable for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the rear hub, which includes the backing plate, park brake cable bracket, and park brake actuator as an assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What components should be installed after the parking brake bracket for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the parking brake actuator, the rear wheel hub, and the parking brake return spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after removing the rear wheels and tires for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Relieve the park brake system tension at the equalizer assembly, followed by removing the rear caliper bracket and the rear rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Backing Plate, Driver Side 25990085 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25990085 Backing Plate, Driver Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25990085 Backing Plate, Driver Side fits certain Chevrolet Impala, Monte Carlo models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Intrigue models.
The original GM component designated by manufacturer part number 25990085 maintains top performance when functioning as the Shield-Parking Brake Actuator Splash; Brake Dust Shield unit at its Driver Side. The component 25990085 is constructed from durable material and its dimensions span 14.5 x 13.7 x 2.2 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Support Plate; Shield, Parking Brake Apply. The part 25990085 has available replacement options 18022582. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.