ChevyParts
My Garage
My Account
Cart
OEM 2000 Buick Regal Brake Backing Plate
Brake Dust Shield- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Backing Plates found
Product Specifications- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 12.2 x 11.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18025205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.5 x 12.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18025206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.5 x 13.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25990085
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Item Weight: 0.80 Pounds
- Item Dimensions: 14.5 x 14.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25990084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Buick Regal Brake Backing Plate
With a comprehensive array of OEM 2000 Buick Regal Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Regal Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Buick Regal Parts Questions & Experts Answers
- Q: How to service and repair the parking brake backing plate on 2000 Buick Regal?A: Service and repair operations on the parking Brake Backing Plate begin by raising the vehicle properly and securing it. The service process starts by removing the tire and wheel then proceeding to detach the Brake Caliper Bracket. Detach the cable from the actuator lever after you loosen the brake cables at the equalizer. You must first detach the spring of the park brake return along with the cable from the park brake bracket until you can free the support plate bolts. After removing the park brake actuator and the rear Wheel Hub you must pull out the park brake shoe along with the support plate. Installation progress starts with supporting the park brake support plate then installing the park brake shoe before proceeding with the rear Wheel Hub. The process of installation includes fitting the park brake actuator followed by proper tightening of the park brake bracket bolts to 10 nm (89 ft. Lbs.). The park brake return spring installation should proceed with the cable attachment to the park brake bracket and finally to the actuator lever. The equalizer nut should be tightened to eliminate cable slack. The Brake Caliper Bracket as well as tire and wheel must be reinstalled and the park brake needs adjustment before lowering the vehicle.
Related 2000 Buick Regal Parts
2000 Buick Regal Wheel Bearing
2000 Buick Regal ABS Control Module
2000 Buick Regal Brake Booster
2000 Buick Regal Brake Caliper Bolt
2000 Buick Regal Brake Caliper Bracket
2000 Buick Regal Brake Caliper Repair Kit
2000 Buick Regal Brake Fluid Level Sensor
2000 Buick Regal Brake Line
2000 Buick Regal Brake Pad
2000 Buick Regal Brake Proportioning Valve
2000 Buick Regal Parking Brake Shoe
2000 Buick Regal Wheel Hub