How to Service and Repair the Brake Backing Plate on Buick Regal?

To service and repair the backing plate, do the following: raise and support the vehicle appropriately. The first step is to take out the tires and wheels with the brake shoes. Next remove the Wheel Cylinder and take out the Parking Brake Cable from the backing plate. Take off the rear Wheel Hub and then the backing plate. For installation, back plate is first installed followed by the rear Wheel Hub. Reconnect the cable parking brake to the backing plate and apply the Wheel Cylinder. Proceed to bleed the brake hydraulic and adjust drum brakes as well as the parking brake. Finally, replace the tires and wheels, and then lower the vehicle.

How to replace the disc brake backing plate on the rear on Buick Regal?

To install the new Brake Backing Plate for the rear wheels you need to support the vehicle while raising it and take off both rear tires and wheels. Release tension from the park brake system while working on the equalizer before removing components at the rear caliper and rotor. Disconnect the park brake cable from both its connections at the rear wheel bracket and disengage the park brake cable return spring from the actuator at the wheel bracket. The entire assembly behind the rear hub including the backing plate with its park brake actuator and cable bracket needs to be removed. First detach the two holders from the park brake actuator and remove the park brake cable bracket. Pull out the brake shoe along with actuator from the backing plate. Mount park brake components, finding first their position on the backing plate while bringing the whole assembly into place over the rear hub. Install the park brake cable bracket along with its two retainers. Put in the rear wheel hub and join the rear park brake cable to its bracket at the rear rim. Additionally, attach the park brake cable return spring to the park brake actuator and rear wheel mount. First mount the rear rotor and caliper bracket system. Then install the rear wheels and tires on top. Complete the system by adjusting the park brake at the equalizer before placing the car on the ground.

OEM Buick Regal Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Brake Backing Plates found

View related parts
Buick Regal Backing Plate, Rear Driver Side Part Number: 13219213
$13.51 MSRP: $25.37
You Save: $11.86 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Backing Plate, Rear Passenger Side Part Number: 13219214
$13.51 MSRP: $25.37
You Save: $11.86 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Splash Shield, Passenger Side Part Number: 459758
$43.27
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Right-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Splash Shield, Front Driver Side Part Number: 22810890
$11.74 MSRP: $22.04
You Save: $10.30 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 13230782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Backing Plate, Front Passenger Side Part Number: 22740573
$17.41 MSRP: $32.72
You Save: $15.31 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Backing Plate, Front Driver Side Part Number: 22740124
$21.77 MSRP: $40.90
You Save: $19.13 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Splash Shield, Front Driver Side Part Number: 13219205
$12.62 MSRP: $22.84
You Save: $10.22 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaced by: 22877576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.4 L GAS
View related parts
Buick Regal Splash Shield, Front Passenger Side Part Number: 22810891
$11.70 MSRP: $21.98
You Save: $10.28 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 13230783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Splash Shield, Front Passenger Side Part Number: 13273626
$19.52 MSRP: $34.10
You Save: $14.58 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Splash Shield, Front Driver Side Part Number: 22877576
$12.62 MSRP: $22.84
You Save: $10.22 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 13219205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Splash Shield, Driver Side Part Number: 459757
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Left-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Backing Plate, Driver Side Part Number: 25990085
Product Specifications
- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Backing Plate Part Number: 18025206
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Backing Plate Part Number: 18025205
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Splash Shield, Front Driver Side Part Number: 13273627
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Backing Plate, Driver Side Part Number: 10199293
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Backing Plate, Passenger Side Part Number: 10199294
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; Splash Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Backing Plate, Passenger Side Part Number: 25990084
Product Specifications
- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Backing Plate, Rear Passenger Side Part Number: 18013525
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Backing Plate, Rear Driver Side Part Number: 18013524
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL

| Page 1 of 2 |Next >

1-20 of 23 Results

Buick Regal Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Brake Backing Plate of Buick Regal vehicles is also known as brake rotor and its main function is to shield brake parts from contaminants and abrasive substance. These shields are made to last as long as the braking system wears irrespective of the 30 000 miles expected on the brake keys. Made from sturdy materials, they guarantee normal operations under normal exposure to adverse environments. Buick Regal models may either have factory fitted backing plates which serve as dust shields, or these may need an after-market addition if at all there are none. The Brake Backing Plate is much more volition to the vehicle, which will permit a simple installation since it need to match the specification of the car. The sizes and designs are also different meaning that for the shield to be appropriately fitted on the vehicle, then the right wheel size has to be used.

Buick Regal Brake Backing Plate Parts and Q&A

Backing Plate
18025205
Q: How to Service and Repair the Brake Backing Plate on Buick Regal?
A:
To service and repair the backing plate, do the following: raise and support the vehicle appropriately. The first step is to take out the tires and wheels with the Brake Shoes. Next remove the Wheel Cylinder and take out the Parking Brake Cable from the backing plate. Take off the rear Wheel Hub and then the backing plate. For installation, back plate is first installed followed by the rear Wheel Hub. Reconnect the cable parking brake to the backing plate and apply the Wheel Cylinder. Proceed to bleed the brake hydraulic and adjust drum brakes as well as the parking brake. Finally, replace the tires and wheels, and then lower the vehicle.
Backing Plate
18025206
Q: How to replace the disc brake backing plate on the rear on Buick Regal?
A:
To install the new Brake Backing Plate for the rear wheels you need to support the vehicle while raising it and take off both rear tires and wheels. Release tension from the park brake system while working on the equalizer before removing components at the rear caliper and rotor. Disconnect the park brake cable from both its connections at the rear wheel bracket and disengage the park brake cable return spring from the actuator at the wheel bracket. The entire assembly behind the rear hub including the backing plate with its park brake actuator and cable bracket needs to be removed. First detach the two holders from the park brake actuator and remove the park brake cable bracket. Pull out the brake shoe along with actuator from the backing plate. Mount park brake components, finding first their position on the backing plate while bringing the whole assembly into place over the rear hub. Install the park brake cable bracket along with its two retainers. Put in the rear wheel hub and join the rear park brake cable to its bracket at the rear rim. Additionally, attach the park brake cable return spring to the park brake actuator and rear wheel mount. First mount the rear rotor and caliper bracket system. Then install the rear wheels and tires on top. Complete the system by adjusting the park brake at the equalizer before placing the car on the ground.