How to replace the front brake caliper bracket on Buick Regal?

First place the brake caliper on mechanic's wire support so you can keep the hydraulic flexible brake hose connected during the replacement process to avoid brake fluid leaks. First unlock the caliper from its bracket while keeping the hydraulic Brake Line connected. After that uninstall the front brake pads. New Brake Caliper Bracket bolts arrive with thread compound that should be replaced with any worn or removed fasteners to keep both the vehicle control and owner safe at all times. Take out the caliper bracket through its bolt release. Coat the bolt boots and bushings with silicone grease before fitting the caliper bracket into place. Secure the bracket using its bolts and tighten them to 180 nm (133 ft. Lbs.). Put back the brake pads and brake caliper last.

How to replace the rear brake caliper bracket on Buick Regal?

You must keep the brake hose connected to the caliper before suspending or supporting the caliper to keep it away from the hose. Take out the brake caliper first then reinstall all loose fasteners because missing them can harm your safety while driving. The threaded brake caliper bolts arrive with built-in thread sealant coating. To take out the caliper bracket you need to first unfasten the bracket bolts then remove it. Check if the bracket has any damage then replace it if necessary. Take off the boot bolts and bushings from the bracket. Before adding the bolt boot and bushing pieces to the caliper bracket users should apply silicone grease to them. Hold the caliper bracket in place with its bolts and tighten them to 185 nm before placing the caliper on.

OEM Buick Regal Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Brake Caliper Brackets found

View related parts
Buick Regal Caliper Support, Rear Driver Side Part Number: 13578099
$146.65 MSRP: $260.70
You Save: $114.05 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Caliper Support, Front Part Number: 13279658
$101.09 MSRP: $196.20
You Save: $95.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Caliper Support, Front Part Number: 18060197
$60.59 MSRP: $82.95
You Save: $22.36 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount Bracket
- Position: Front
- Replaces: 18022078
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 2.8L V6, 3.1L V6, 3.8L V6, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Caliper Bracket Part Number: 18029882
$13.76 MSRP: $81.77
You Save: $68.01 (84%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Support; Caliper Mount Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Support Plate Bracket, Passenger Side Part Number: 10409252
$13.11
ADD TO CART
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Backing Plate Bracket; Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Caliper Support, Passenger Side Part Number: 22968795
$88.82 MSRP: $139.11
You Save: $50.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Passenger Side
- Replaced by: 84665836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Caliper Support, Driver Side Part Number: 22796450
$88.01 MSRP: $137.85
You Save: $49.84 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Caliper Support, Rear Driver Side Part Number: 13533568
$58.99 MSRP: $92.41
You Save: $33.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Replaces: 13578098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Caliper Support, Rear Passenger Side Part Number: 13533567
$60.47 MSRP: $94.72
You Save: $34.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Replaces: 13578100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Caliper Support, Rear Passenger Side Part Number: 13578101
$256.29 MSRP: $704.54
You Save: $448.25 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Caliper Support, Front Part Number: 13279657
$63.76 MSRP: $113.86
You Save: $50.10 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Caliper Support, Rear Part Number: 13275914
Product Specifications
- Other Name: Bracket; Brake Caliper Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Buick Regal Backing Plate Bracket, Driver Side Part Number: 10409251
$3.64 MSRP: $5.70
You Save: $2.06 (37%)
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Support Plate Bracket; Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Caliper Bracket Part Number: 88967228
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Support; Carrier
- Position: Rear
- Replaces: 18029931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

Buick Regal Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Regal Brake Caliper Bracket is one of the most crucial parts known for its sturdiness and efficiency which facilitates its crucial place in the brake system of different Buick Regal cars. Located between the brake calipers and the wheels, this component's purpose is to reliably position the brake pads with a view of continuously applying pressure on brake rotors to provide the optimal stopping power possible. Refinement similarly boosting the solidity of the braking system, is also majorly useful in increasing safety of the automobile. Buick Regal, a mid-sized car that has gone through changes in generation after its introduction in 1973, has applied high-quality Brake Caliper Brackets steadily in the models of Regal Custom, Limited, Gran Sport, etc. All of these models have the opportunity to use the Brake Caliper Bracket made of high-strength steel due to the specifics of the car's brake system. For instance, the Brake Caliper Bracket is universal for the Regal, and this means that those who opt for the Regal will not be disappointed with the performance in regard to this part. Moreover, in the automotive world, it has positioned Brake Caliper Bracket distinctively due to strength and quality engineering which improves the drive. In conclusion, the Buick Regal Brake Caliper Bracket is a good illustration strengthening Buick's brand responsiveness as well as performance, therefore making it a strong factor for any undertakings guaranteeing durability in every Regal car.

Buick Regal Brake Caliper Bracket Parts and Q&A

Backing Plate Bracket, Driver Side
10409251
Q: How to replace the front brake caliper bracket on Buick Regal?
A:
First place the brake caliper on mechanic's wire support so you can keep the hydraulic flexible brake hose connected during the replacement process to avoid brake fluid leaks. First unlock the caliper from its bracket while keeping the hydraulic Brake Line connected. After that uninstall the front Brake Pads. New Brake Caliper Bracket bolts arrive with thread compound that should be replaced with any worn or removed fasteners to keep both the vehicle control and owner safe at all times. Take out the caliper bracket through its bolt release. Coat the bolt boots and bushings with silicone grease before fitting the caliper bracket into place. Secure the bracket using its bolts and tighten them to 180 nm (133 ft. Lbs.). Put back the brake pads and brake caliper last.
Support Plate Bracket, Passenger Side
10409252
Q: How to replace the rear brake caliper bracket on Buick Regal?
A:
You must keep the brake hose connected to the caliper before suspending or supporting the caliper to keep it away from the hose. Take out the brake caliper first then reinstall all loose fasteners because missing them can harm your safety while driving. The threaded brake caliper bolts arrive with built-in thread sealant coating. To take out the caliper bracket you need to first unfasten the bracket bolts then remove it. Check if the bracket has any damage then replace it if necessary. Take off the boot bolts and bushings from the bracket. Before adding the bolt boot and bushing pieces to the caliper bracket users should apply silicone grease to them. Hold the caliper bracket in place with its bolts and tighten them to 185 nm before placing the caliper on.