How to Service and Repair the Brake Line on Buick Regal?

Before starting replace the front brake hose first lift and stabilize the vehicle and then take off the front tire assembly. Remove all dirt from brake lines and brake nipple connections before putting a rubber seal on the open nipple end to protect fluid and contamination. Keep the brake pipe straight while using a back up wrench to detach its end from the brake hose. Then safely seal the brake pipe fitting without distorting either element. Slip the clip retaining the hose from its bracket and free the hose from the fixture. Extract the brake hose bolt from the caliper then disengage the brake hose from its connection with the caliper. You should remove both copper brake hose gaskets which may adhere to either the brake caliper or hose terminals. You need replacement copper brake hose gaskets to attach with the brake hose bolt before installing. Fit the brake hose to caliper bolt onto the brake caliper while applying a torque of 54 nm (40 ft. Lbs.). Set the brake hose into place while the vehicle rests on its suspension and position it through the bracket with smooth bends before aligning the hose fitting into its notch following the hose paint stripe indications. Fit the retainer around the hose fitting at the bracket before taking off the rubber stopper from the brake pipe/stream. Place the brake pipe fitting onto the brake hose and fix it using a back up wrench on the hose. Do not bend the bracket or pipe during the installation process then secure the brake pipe fitting at 15 nm (11 ft. Lbs.). Place the front wheel assembly back onto its position while steering checks show the hose must stay away from suspension parts; replace the hose if necessary to solve this problem. Close the brake system with hydraulic fluid and let the vehicle slowly return to ground level.

How to replace the front brake line on Buick Regal?

Before replacing the front brake hose elevate the vehicle properly and place support stands under it. Take off the front wheel and tire before cleaning all foreign particles off the brake hoses and fittings. Put a second wrench on the hose fitting to disconnect the brake pipe from the brake hose without harming either part. Unclip the metal holder and easily slide out the hose. Take off the brake hose bolt and attachment pieces except for the washers which should be discarded. You should connect the brake hose caliper bolt , the hose , and two new washers onto the caliper unit. Use only new washers during installation. Add brake fluid onto the bolt threads before turning the brake hose caliper bolt to 54 Nm (40 ft. lbs.). Apply brake hose to bracket and position it right before inserting the hose connector into the bracket notch following the hose paint strips. Fasten the retainer at the hose connection point on the bracket then use a back up wrench to secure the brake pipe with the hose. Prevent bracket and pipe flexion during this step. Tighten the tube nut on the brake pipe to 15 Nm. Put back the front tire and wheel but keep the hose away from suspension parts when turning sharply; replace the hose when it touches the suspension parts. Complete the steps by putting the vehicle down and letting air escape from the brake system.

OEM Buick Regal Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Brake Lines found

View related parts
Buick Regal Cooler Line Part Number: 12541500
$40.71 MSRP: $63.76
You Save: $23.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Evaporation Emission System (Fuel Tank End); Transmission Oil Cooler Line; Oil Cooler Tube; Line; Lines; Pipe, Evaporation Emission System(Fuel Tank End); Standard Parts
- Replaces: 01324714, 1324714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Front Driver Side Part Number: 84025391
$34.01 MSRP: $63.86
You Save: $29.85 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22868685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Brake Hose, Front Part Number: 19169839
$12.42 MSRP: $22.19
You Save: $9.77 (45%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Front
- Replaces: 09762810, 18031820, 9762810
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Flex Hose, Front Driver Side Part Number: 84025389
$15.35 MSRP: $27.79
You Save: $12.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 13327589, 20909932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Flex Hose, Rear Driver Side Part Number: 19173568
$22.43 MSRP: $40.06
You Save: $17.63 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 17987367, 18032316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose Part Number: 9762810
$12.42 MSRP: $22.19
You Save: $9.77 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose & Sleeve Assembly; Hydraulic Hose; Brake Hose; Brake Line
- Replaced by: 19169839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Flex Hose, Rear Passenger Side Part Number: 19173567
$22.66 MSRP: $40.47
You Save: $17.81 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 17987368, 18032315
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Rear Part Number: 19173804
$10.28 MSRP: $18.35
You Save: $8.07 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999549, 18032567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Front Driver Side Part Number: 22792214
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Buick Regal Flex Hose, Front Driver Side Part Number: 22163577
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Driver Side Part Number: 22163747
Product Specifications
- Other Name: Hose Assembly-Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Buick Regal | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Front Passenger Side Part Number: 84025390
$16.00 MSRP: $28.60
You Save: $12.60 (45%)
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 20921404
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Flex Hose Part Number: 9761251
Product Specifications
- Other Name: Hose Assembly-Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Flex Hose, Passenger Side Part Number: 15876863
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Driver Side Part Number: 15876864
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Passenger Side Part Number: 22163746
Product Specifications
- Other Name: Hose Assembly-Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Buick Regal | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Driver Side Part Number: 10112053
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Passenger Side Part Number: 22163744
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163496, 22163680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Buick Regal | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose, Driver Side Part Number: 22163745
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Buick Regal | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Flex Hose Part Number: 22163421
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

Buick Regal Brake Line

Want to cut long-term maintenance and repair costs? Choose OEM Brake Line. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Brake Line includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Brake Line in Buick Regal vehicles is responsible for transmitting brake fluid received from the master cylinder to the brake caliper pistons so that the hydraulic brake working can be achieved. The metal brake lines are more susceptible to both corrosion and impact which causes the fluid leaks and reduce hydraulic pressure. Another area of rubber on a motorcycle that is vulnerable to deterioration are brake hoses, both physically and internally, affecting the brakes. If replacement is needed, both preformed brake line kit and direct replacement brake hoses are available which is time-saving and can resist corrosion. Switching to stainless steel braided hoses can give a major attribute in the improvement of the brakes' hydraulic feel and sensitivity, especially relevant to spirited driving.

Buick Regal Brake Line Parts and Q&A

Flex Hose, Front Driver Side
22163577
Q: How to Service and Repair the Brake Line on Buick Regal?
A:
Before starting replace the front brake hose first lift and stabilize the vehicle and then take off the front tire assembly. Remove all dirt from brake lines and brake nipple connections before putting a rubber seal on the open nipple end to protect fluid and contamination. Keep the brake pipe straight while using a back up wrench to detach its end from the brake hose. Then safely seal the brake pipe fitting without distorting either element. Slip the clip retaining the hose from its bracket and free the hose from the fixture. Extract the brake hose bolt from the caliper then disengage the brake hose from its connection with the caliper. You should remove both copper brake hose gaskets which may adhere to either the brake caliper or hose terminals. You need replacement copper brake hose gaskets to attach with the brake hose bolt before installing. Fit the brake hose to caliper bolt onto the brake caliper while applying a torque of 54 nm (40 ft. Lbs.). Set the brake hose into place while the vehicle rests on its suspension and position it through the bracket with smooth bends before aligning the hose fitting into its notch following the hose paint stripe indications. Fit the retainer around the hose fitting at the bracket before taking off the rubber stopper from the brake pipe/stream. Place the brake pipe fitting onto the brake hose and fix it using a back up wrench on the hose. Do not bend the bracket or pipe during the installation process then secure the brake pipe fitting at 15 nm (11 ft. Lbs.). Place the front wheel assembly back onto its position while steering checks show the hose must stay away from suspension parts; replace the hose if necessary to solve this problem. Close the brake system with hydraulic fluid and let the vehicle slowly return to ground level.
Flex Hose, Driver Side
15876864
Q: How to replace the front brake line on Buick Regal?
A:
Before replacing the front brake hose elevate the vehicle properly and place support stands under it. Take off the front wheel and tire before cleaning all foreign particles off the brake hoses and fittings. Put a second wrench on the hose fitting to disconnect the brake pipe from the brake hose without harming either part. Unclip the metal holder and easily slide out the hose. Take off the brake hose bolt and attachment pieces except for the washers which should be discarded. You should connect the brake hose caliper bolt , the hose , and two new washers onto the caliper unit. Use only new washers during installation. Add brake fluid onto the bolt threads before turning the brake hose caliper bolt to 54 Nm (40 ft. lbs.). Apply brake hose to bracket and position it right before inserting the hose connector into the bracket notch following the hose paint strips. Fasten the retainer at the hose connection point on the bracket then use a back up wrench to secure the brake pipe with the hose. Prevent bracket and pipe flexion during this step. Tighten the tube nut on the brake pipe to 15 Nm. Put back the front tire and wheel but keep the hose away from suspension parts when turning sharply; replace the hose when it touches the suspension parts. Complete the steps by putting the vehicle down and letting air escape from the brake system.