Make sure this part fits

GM 15876863
Flex Hose, Passenger Side

1999-2009 GM

Customer Questions & Expert Answers (25)
GM 15876863 Flex Hose, Passenger Side
  • Part Description
    Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Passenger Side
  • Replaces
    22163798
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15876863
    Part DescriptionHose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
    Item Dimensions13.6 x 4.9 x 2.0 inches
    Item Weight0.80 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22163798
    ManufacturerGeneral Motors
    SKU15876863
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2008-2009 Buick LaCrosseSuper8 Cyl 5.3 L GAS
    1999-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1999-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1999-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15876863 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15876863 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What components should be removed from the caliper for the 2000 Buick Century? Posted by Customer
    A:
    The brake hose bolt, the hose, and the two washers (discard the washers).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the tubing be cut for the 2000 Buick Century? Posted by Customer
    A:
    Cut the tubing to length based on the old pipe measurement plus an additional 3 mm (1/8 inch) for each ISO flare.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after placing the new brake hose for the 2001 Buick Century? Posted by Customer
    A:
    Install the retainer clips onto the hose fittings at the brackets, then use a backup wrench to connect the brake pipe to the brake hose without bending the bracket or the pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How much tubing should extend out when sliding the clamping nut over the brake pipe for the 2002 Buick Century? Posted by Customer
    A:
    Approximately 19 mm (3/4 inch).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake pipe to the brake hose for the 2003 Buick Century? Posted by Customer
    A:
    Connect the brake pipe to the brake hose using a backup wrench on the hose fitting, ensuring not to bend the bracket or the pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake hose to caliper bolt for the 2004 Buick Century? Posted by Customer
    A:
    Tighten it to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the two copper brake hose gaskets for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Discard the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be used for installation of the new brake hose for the 2003 Buick Regal? Posted by Customer
    A:
    Use new copper brake hose gaskets and assemble them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured when inserting the collet into the tool body for the 2001 Buick Regal? Posted by Customer
    A:
    The brake pipe end should contact the forming mandrel face.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe be cut for the 2004 Buick Regal? Posted by Customer
    A:
    Cut the brake pipe squarely to the measured length using the pipe cutter included in the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the bolt threads before tightening for the 2000 Buick Regal? Posted by Customer
    A:
    Lubricate the bolt threads with brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed into the bracket for the 2001 Buick Regal? Posted by Customer
    A:
    Ensure there are no kinks and align the hose fitting with the notch in the bracket, using the hose paint stripe as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hoses and fittings before detaching them for the 2000 Buick Regal? Posted by Customer
    A:
    Clean any dirt and foreign material from the brake hoses and fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the process for the 2005 Buick Century? Posted by Customer
    A:
    Secure the brake pipe to the retainers and bleed the hydraulic brake system, checking for leaks with the engine running and brakes applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after reinstalling the front tire and wheel assembly for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Ensure the hose does not contact any part of the suspension during extreme turns; if it does, remove the hose and correct the issue.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose into the bracket for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Attach the retainer onto the hose fitting at the bracket, then remove the rubber cap or plug from the exposed brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you detach the brake pipe from the brake hose for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Use a backup wrench on the hose fitting, taking care not to bend the brake pipe or the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hoses and brake pipe fitting before disconnecting for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Clean any dirt from the brake hoses and brake pipe fitting, and install a rubber cap or plug on the exposed brake pipe fitting end to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after reinstalling the front tire and wheel assembly for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Ensure the hose does not contact any suspension parts during extreme turns; if it does, correct the issue.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed into the bracket for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    With the vehicle's weight on the suspension, install the brake hose into the bracket, ensuring there are no kinks and aligning the hose fitting with the notch in the bracket using the hose paint stripe as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How much tubing should extend out when sliding the clamping nut over the brake pipe for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Approximately 19 mm (3/4 inch).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be positioned in the bracket for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Ensure there are no kinks and align the hose fitting with the notch in the bracket, using the hose paint stripe as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the tubing be prepared before installation for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Obtain the recommended tubing and steel fitting nuts of the correct size, cut the tubing to length based on the old pipe measurement plus an additional 3 mm (1/8 inch) for each ISO flare.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How is the flare created for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Select the appropriate forming mandrel and operate the lever of the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15876863, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15876863 Flex Hose, Passenger Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15876863 Flex Hose, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery