ChevyParts
My Garage
My Account
Cart
OEM 2003 Buick Regal Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Lines found
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.0 x 7.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.8 x 7.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly-Rear Brake-Right-Hand; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.6 x 5.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 16.6 x 7.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.5 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 4.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Buick Regal Brake Line
With a comprehensive array of OEM 2003 Buick Regal Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Regal Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Buick Regal Parts Questions & Experts Answers
- Q: How to Replace a Rear Disc Brake Line on 2003 Buick Regal?A: Lift up and prop the vehicle, remove rear tire and wheel assembly. To replace the rear (disc) brake hose. Clean off any dirt from brake hoses and brake pipe fitting, and install a rubber cap or plug on the exposed brake pipe fitting end to avoid fluid escape and contamination. Unplug the brake pipe fitting from the brake hose by using a back up wrench on the hose fitting, cap or plug the brake pipe fitting end without bending the brake pipe or bracket. Take off the brake hose retaining clip from the hose mounting bracket and take out the hose out of the bracket. Second, remove the bolt on the brake hose to caliper, and disconnect the brake hose from the caliper, and throw out the two copper brake hose gaskets that often stick to the caliper or hose end. When it comes to installation, use new copper brake hose gaskets and fasten them with the brake hose bolt to the brake hose . Mount the brake hose to caliper bolt to the brake caliper and tighten to 54 nm (40 ft. Lbs.). With the weight of the vehicle on the suspension place the brake hose into the bracket and there should be no kinks; position the hose fitting to the notch for the bracket using the hose paint stripe for guidance. Connect the retainer to the hose's fitting at the bracket, take rubber cap or plug from brake pipe's socket end and attach it to the brake hose, with the use of back up wrench, without turning the bracket or pipe, fix the fitting in 15 nm(11 ft.lbs.). Replace rear tire and wheel assembly while avoiding the hose from touching any assembly in the suspension. If so, remove the hose and fix the problem. Finally bleed the hydraulic brake system and drop the vehicle.
Related 2003 Buick Regal Parts
2003 Buick Regal Wheel Bearing
2003 Buick Regal ABS Control Module
2003 Buick Regal Brake Caliper Bolt
2003 Buick Regal Brake Caliper Piston
2003 Buick Regal Brake Calipers
2003 Buick Regal Brake Drum
2003 Buick Regal Brake Shoe
2003 Buick Regal Hydraulic Hose
2003 Buick Regal Parking Brake Shoe
2003 Buick Regal Wheel Cylinder
2003 Buick Regal Wheel Hub
2003 Buick Regal Wheel Hub Bolt