Make sure this part fits

GM 22163797
Flex Hose, Driver Side

1999-2003 GM

Customer Questions & Expert Answers (11)
GM 22163797 Flex Hose, Driver Side
  • Part Description
    Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22163797
    Part DescriptionHose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
    Item Dimensions16.6 x 7.5 x 3.5 inches
    Item Weight1.00 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22163797
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2003 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1999-2003 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1999-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1999-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22163797 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22163797 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before flaring the fittings on the tubing for the 2002 Buick Century? Posted by Customer
    A:
    Chamfer both the inside and outside diameters with a de-burring tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake hose for the 2001 Buick Century? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting brackets and take out the hose from the brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed from the hose mounting brackets for the 2003 Buick Century? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting brackets and take out the hose from the brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after reinstalling the rear tire and wheel for the 2000 Buick Century? Posted by Customer
    A:
    Ensure the hose does not contact any suspension parts; if it does, correct the issue.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for the brake hose to caliper bolt for the 2001 Buick Regal? Posted by Customer
    A:
    Tighten it to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the installation process for the 2000 Buick Regal? Posted by Customer
    A:
    Attach the brake hose bolt, the hose, and two new washers to the caliper, ensuring to use new washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the flaring tool be prepared for the 2000 Buick Century? Posted by Customer
    A:
    Clamp the flaring tool body in a vise, select the correct size collet and forming mandrel, and insert the proper forming mandrel into the tool body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose into the bracket for the 2003 Buick Regal? Posted by Customer
    A:
    Attach the retainer onto the hose fitting at the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after raising for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the rear tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the flaring tool be secured for the 2001 Buick Regal? Posted by Customer
    A:
    Clamp the flaring tool body in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22163797, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22163797 Flex Hose, Driver Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22163797 Flex Hose, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery