ChevyParts
My Garage
My Account
Cart
OEM 2001 Buick Regal Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Lines found
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.0 x 7.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.8 x 7.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly-Rear Brake-Right-Hand; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.6 x 5.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 16.6 x 7.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.5 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 4.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 Buick Regal Brake Line
With a comprehensive array of OEM 2001 Buick Regal Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Regal Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Buick Regal Parts Questions & Experts Answers
- Q: How to replace the brake line using the J 29803-A ISO Flaring Kit on 2001 Buick Regal?A: You need to use the J 29803-A ISO Flaring Kit when replacing the brake pipe by using double-walled steel brake pipe to stop brake system failure. Secure new brake pipes through their correct fasteners at their designated spots to prevent harm during installation. Single lap flaring tools do not work for brake systems because double lap flaring tools produce a reliable flare design that keeps high system pressure inside the system. First buy the standard package of steel fitting nuts and approved tubing then measure the old pipe and add 3 mm (1/8 inch) to each ISO flare length. Apply de-burring tools to both tube ends before fitting installation by flaring their internal and external surfaces. Before working remove oil residue from brake pipe and flaring tool surfaces before putting the flaring tool body into a vise for clamping. Place the right collet and forming mandrel into the tool body then add the mandrel into its designated slot. Keep holding the mandrel and thread the forcing screw until it reaches the mandrel then reverse it one full rotation. Slip the clamping nut along the brake pipe until it reaches and securely holds the selected collet with a remaining 19 mm (3/4 inch) tube length. Place the collet into the tool body and rotate it down to make the brake pipe connect with the forming mandrel face before fastening the clamping nut tightly. Adjust the forcing screw until you reach bottom position and never over-torque the screw to prevent a misshaped flare. Take the clamping nut off the tool body then separate the clamping nut and collet for the flare to become operational. Complete the process by forming the new pipe to match the old part and keeping at least 19 mm (3/4 inch) space between it and all moving parts that might vibrate.
Related 2001 Buick Regal Parts
2001 Buick Regal Wheel Bearing
2001 Buick Regal ABS Control Module
2001 Buick Regal Brake Caliper Bolt
2001 Buick Regal Brake Caliper Piston
2001 Buick Regal Brake Calipers
2001 Buick Regal Brake Drum
2001 Buick Regal Brake Proportioning Valve
2001 Buick Regal Hydraulic Hose
2001 Buick Regal Parking Brake Shoe
2001 Buick Regal Wheel Cylinder
2001 Buick Regal Wheel Hub
2001 Buick Regal Wheel Hub Bolt