How to replace the rear brake caliper bracket on Chevrolet Impala?

Before switching the brake caliper bracket start with two steps. First maintain the brake hose connection to the caliper unit and suspend the caliper through a support to prevent depending it on the hose only. Take out the caliper first and put back all fasteners properly as faulty installation leads to vehicle loss control and safety risks. The new brake caliper bolts arrive with built-in thread lubricant. Take off the caliper bracket by removing its two bolts. Check the bracket for damage when disconnecting bolt boots and bushings. Replace the bracket if it shows cracks during inspection. Apply silicone grease to bolt boots and bushings before putting them back into their places on the caliper bracket. Firmly mount the caliper bracket with bolts at 125 Nm pressure before placing back the caliper.

How to replace the front brake caliper bracket on Chevrolet Impala?

When replacing the front Brake Caliper Bracket start by maintaining the brake caliper position with heavy mechanic wire or an equivalent support system that keeps the hydraulic flexible brake hose connected to prevent damage and brake fluid leaks. Start by taking off the front brake pads before accessing the caliper bracket bolts then properly remove the caliper bracket . Begin by cleaning all threads on caliper bracket bolts before checking the mounting hole condition of the knuckle for optimal clamp strength. Brake Caliper Bracket bolts require threadlocker gm p/n 12345493 (Canadian P/N 10953488) for thread application. Using the bracket bolts install the caliper bracket while torquing them to 180 nm (133 lb ft). Place the front brake pads and caliper unit as the last step.

OEM Chevrolet Impala Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Caliper Brackets found

View related parts
Chevrolet Impala Caliper Support, Front Part Number: 13279658
$101.09 MSRP: $196.20
You Save: $95.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Support Plate Bracket, Passenger Side Part Number: 10409252
$13.11
ADD TO CART
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Backing Plate Bracket; Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Caliper Bracket, Front Part Number: 18029829
$77.76 MSRP: $121.81
You Save: $44.05 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Caliper Support, Rear Driver Side Part Number: 13533568
$58.99 MSRP: $92.41
You Save: $33.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Replaces: 13578098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Caliper Support, Rear Passenger Side Part Number: 13533567
$60.47 MSRP: $94.72
You Save: $34.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Replaces: 13578100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Caliper Support, Front Part Number: 25983766
$44.70 MSRP: $79.81
You Save: $35.11 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 21993097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Backing Plate Bracket, Driver Side Part Number: 10409251
$3.64 MSRP: $5.70
You Save: $2.06 (37%)
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Support Plate Bracket; Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Caliper Bracket Part Number: 88967228
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Support; Carrier
- Position: Rear
- Replaces: 18029931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Caliper Support Part Number: 25990075
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Support; Carrier
- Position: Rear
- Replaces: 18048689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Caliper Support, Front Part Number: 25983743
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 15251790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Impala Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala brake caliper bracket forms the essence of Chevrolet impala's brake system and thus is vital in the vehicle. Its main function is to safely anchor the brake pads onto the brake caliper since this adds consistent pressure on the brake rotors, a factor that determines the braking force as well as safety of the vehicle. Changes in the Chevrolet Impala Brake Caliper Bracket over the spanning generations for the Impala can be illustrated as below: Such an evolution shows Chevrolet's concern towards enhancing automotive engineering through the production of each each Brake Caliper Bracket to improve the vehicle performance. The Chevrolet Impala's engine offers many options in power to deliver excellent transmission systems; Meanwhile, the Brake Caliper Bracket is a crucial factor in intensifying the car's braking system not only for better performance but for assurance of safety as well. Of equal importance, one can easily find this Brake Caliper Bracket for a variety of Impala models, which shows this product's universality among car owners. These can include superior materials and accurate work on the car's structure to make it stand out in the automotive niche while continuing to make Chevrolet Impala choice of the driving market's leaders who paid regard to the performance and safety of their vehicles. All in all, the Brake Caliper Bracket is absolutely essential for the proper working and reliable operation of the braking system of the Impala.

Chevrolet Impala Brake Caliper Bracket Parts and Q&A

Support Plate Bracket, Passenger Side
10409252
Q: How to replace the rear brake caliper bracket on Chevrolet Impala?
A:
Before switching the brake caliper bracket start with two steps. First maintain the brake hose connection to the caliper unit and suspend the caliper through a support to prevent depending it on the hose only. Take out the caliper first and put back all fasteners properly as faulty installation leads to vehicle loss control and safety risks. The new brake caliper bolts arrive with built-in thread lubricant. Take off the caliper bracket by removing its two bolts. Check the bracket for damage when disconnecting bolt boots and bushings. Replace the bracket if it shows cracks during inspection. Apply silicone grease to bolt boots and bushings before putting them back into their places on the caliper bracket. Firmly mount the caliper bracket with bolts at 125 Nm pressure before placing back the caliper.
Caliper Bracket
88967228
Q: How to replace the front brake caliper bracket on Chevrolet Impala?
A:
When replacing the front Brake Caliper Bracket start by maintaining the brake caliper position with heavy mechanic wire or an equivalent support system that keeps the hydraulic flexible brake hose connected to prevent damage and brake fluid leaks. Start by taking off the front Brake Pads before accessing the caliper bracket bolts then properly remove the caliper bracket . Begin by cleaning all threads on caliper bracket bolts before checking the mounting hole condition of the knuckle for optimal clamp strength. Brake Caliper Bracket bolts require threadlocker gm p/n 12345493 (Canadian P/N 10953488) for thread application. Using the bracket bolts install the caliper bracket while torquing them to 180 nm (133 lb ft). Place the front brake pads and caliper unit as the last step.