How to replace the front wheel bearing/hub on Chevrolet Impala?

Start your replacement project by properly lifting and holding your vehicle. Take off the tire and wheel before disconnecting the Wheel Speed Sensor electrical connector if available and taking it from its bracket. You can take off the front wheel drive shaft nut but stop both the wheel and caliper parts from rotating using a flat tool. Fit the j 42129 Wheel Hub remover (J 42129) parts to the Wheel Bearing/hub by tightening the wheel nuts to three nuts. Using the j 42129 tool push the wheel drive shaft out of the Wheel Bearing/hub space. Remove and discard all Wheel Bearing/hub bolts before taking off the tool from its position. Check if the boot of the wheel drive shaft has no damage. Remove the Wheel Bearing and hub assembly alongside the splash shield. Keep track of its position to reinstall it later. Put the new Wheel Bearing and hub in its proper location marked on removal along with the splash shield before installing fresh fasteners which need to be tightened up to 130 nm. Fitting the brake rotor and caliper back in place requires installation of the front wheel drive shaft nut at 190 nm torque (140 ft. Lbs.). Use a tool like a drift or flat blade to stop the rotor during tightening. Before attaching the Wheel Speed Sensor the connector clip must fit tightly into the bracket positioning. Put on the tire and wheel after lowering the vehicle to the ground.

OEM Chevrolet Impala Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Wheel Bearings found

View related parts
Chevrolet Impala Front Hub & Bearing
Part Number: 88964096
$84.51 MSRP: $250.16
You Save: $165.65 (67%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 89047803, 12413005, 12413097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2008 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Wheel Bearing, Front
Part Number: 457196
$23.04 MSRP: $43.24
You Save: $20.20 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Brace; Axle Bearing; Wheel Bearings; Front Inner Bearing; Transmission Countershaft Gear Bearing; Front Wheel Inner Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Wheel Bearing, Rear
Part Number: 88927028
$25.99 MSRP: $48.81
You Save: $22.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Axle Bearings; Shaft Bearings; Housing Bearing; Bearing; Bearing, Transmission Countershaft Gear
- Position: Rear
- Replaces: 15595140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Wheel Bearing
Part Number: 457049
$24.87 MSRP: $45.03
You Save: $20.16 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Outer; Axle Bearing; Wheel Bearings; Front Wheel Bearing; Front Bearing; Outer Wheel Bearing; Outer Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Hub & Bearing, Rear
Part Number: 13585741
$163.89 MSRP: $320.88
You Save: $156.99 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Hub Assembly, Front
Part Number: 84641365
$217.28 MSRP: $425.44
You Save: $208.16 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Front Hub & Bearing, Rear
Part Number: 13546785
$125.51 MSRP: $243.60
You Save: $118.09 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Rear Hub; Hub & Bearing Assembly; Front Wheel Inner Hub & Bearing; Rear Wheel Bearing
- Position: Rear
- Replaced by: 13564982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Hub Assembly, Front
Part Number: 12429204
$217.28 MSRP: $425.44
You Save: $208.16 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Front Hub; Hub & Bearing; Hub Kit, Rear Wheel
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Hub & Bearing, Rear
Part Number: 12413091
$96.99 MSRP: $175.54
You Save: $78.55 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Replaces: 07470611, 7470611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Hub & Bearing, Rear
Part Number: 19122338
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Replaces: 12413099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Wheel Bearing, Rear
Part Number: 12471606
$8.06 MSRP: $14.39
You Save: $6.33 (44%)
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Shaft Bearings; Bearing Assembly; Housing Bearing; Axle Shaft Bearing; Transmission Countershaft Gear Bearing.
- Position: Rear
- Replaces: 09428573, 07451785, 9428573, 7451785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Axle Bearings, Rear
Part Number: 7451785
$8.06 MSRP: $14.39
You Save: $6.33 (44%)
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel R5; Wheel Bearing; Axle Bearing; Shaft Bearings; Bearing, Transmission Counter Gear; Bearing, Rear Axle U Joint; Bearing, Countershaft
- Position: Rear
- Replaced by: 12471606
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Hub & Bearing, Rear
Part Number: 12413029
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Impala Wheel Bearing

Our website offers an extensive catalog of genuine Chevrolet Impala Wheel Bearing at unbeatable prices. Every OEM Chevrolet Impala Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Wheel Bearing Parts Questions & Experts Answers

Hub Assembly, Front
84641365
Q: How to replace the front wheel bearing/hub on Chevrolet Impala?
A: Start your replacement project by properly lifting and holding your vehicle. Take off the tire and wheel before disconnecting the Wheel Speed Sensor electrical connector if available and taking it from its bracket. You can take off the front wheel drive shaft nut but stop both the wheel and caliper parts from rotating using a flat tool. Fit the j 42129 Wheel Hub remover (J 42129) parts to the Wheel Bearing/hub by tightening the wheel nuts to three nuts. Using the j 42129 tool push the wheel drive shaft out of the Wheel Bearing/hub space. Remove and discard all Wheel Bearing/hub bolts before taking off the tool from its position. Check if the boot of the wheel drive shaft has no damage. Remove the Wheel Bearing and hub assembly alongside the splash shield. Keep track of its position to reinstall it later. Put the new Wheel Bearing and hub in its proper location marked on removal along with the splash shield before installing fresh fasteners which need to be tightened up to 130 nm. Fitting the brake rotor and caliper back in place requires installation of the front wheel drive shaft nut at 190 nm torque (140 ft. Lbs.). Use a tool like a drift or flat blade to stop the rotor during tightening. Before attaching the Wheel Speed Sensor the connector clip must fit tightly into the bracket positioning. Put on the tire and wheel after lowering the vehicle to the ground.