Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88964096
Front Hub & Bearing

2000-2008 GM

Customer Questions & Expert Answers (42)
GM 88964096 Front Hub & Bearing
GM 88964096 Front Hub & Bearing
GM 88964096 Front Hub & Bearing
GM 88964096 Front Hub & Bearing
GM 88964096 Front Hub & Bearing
  • Part Description
    Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.
  • Position
    Front
  • Replaces
    89047803, 12413005, 12413097
  • Manufacturer
    General Motors
Make sure this part fits
$84.51 MSRP: $250.16
You Save: $165.65 (67%)
1
ADD TO CART

  • 88964096 Front Hub & Bearing is Ref No. 1 in the diagram below

    2007 Chevy Impala Front Hub & Bearing Diagram for 88964096
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88964096

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2007 Buick LaCrosseCX, CXL, CXS6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
    2003-2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    2004-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2000-2008 Chevrolet Impala50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2005 Chevrolet VentureLS, LT, Plus6 Cyl 3.4 L GAS
    2004-2005 Pontiac AztekBase, Rally6 Cyl 3.4 L GAS
    2003-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88964096 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88964096 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear wheel bearing/hub for the 2003 Buick Century? Posted by Customer
    A:
    Raise and support the vehicle securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What should be removed after raising for the 2004 Buick Regal? Posted by Customer
    A:
    Remove the tires and wheels, followed by the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be ensured regarding the wheel drive shaft outer seal/boot for the 2004 Buick Century? Posted by Customer
    A:
    Ensure it remains undamaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the torque specification for the new wheel bearing/hub bolts for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Tighten them to 130 N.m (96 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after removing the tire and wheel for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Disconnect the wheel speed sensor electrical connector if equipped, and remove it from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done with the wheel bearing/hub bolts for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Remove and discard the wheel bearing/hub bolts, ensuring the wheel drive shaft outer seal/boot is undamaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done with the wheel bearing/hub bolts for the 2003 Buick Century? Posted by Customer
    A:
    Remove and discard the wheel bearing/hub bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the first step to replace the rear wheel bearing/hub for the 2005 Buick LaCrosse? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be disconnected if equipped with ABS for the 2005 Buick Century? Posted by Customer
    A:
    Disconnect the antilock brake system (ABS) electrical connector from the wheel speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the rear wheel bearing/hub assembly for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the rear wheel bearing/hub for the 2003 Buick Regal? Posted by Customer
    A:
    Raise and support the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the first step to replace the front wheel bearing/hub for the 2003 Buick Regal? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the rear wheel bearing/hub assembly for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step in the installation process for the 2003 Buick Regal? Posted by Customer
    A:
    Attach the park brake actuator to the rear wheel bearing/hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after removing the brake drum for the 2003 Buick Regal? Posted by Customer
    A:
    Disconnect the ABS electrical connector from the wheel speed sensor if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What should be followed during installation to prevent damage for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Follow the correct tightening sequence and specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What tool is used to push the wheel drive shaft out of the wheel bearing/hub for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Use the Front Hub Spindle Remover (J 28733-B).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What needs to be disconnected and removed next for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Disconnect and remove the wheel speed sensor electrical connector from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the first step to replace the front wheel bearing/hub for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Begin by raising and supporting the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    Why is it important to replace fasteners with new ones for the 2004 Buick Rendezvous? Posted by Customer
    A:
    To prevent loss of vehicle control and personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What should be done after removing the tire and wheel for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Detach the knuckle and take out the wheel bearing/hub assembly knuckle bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    Why is it important to replace fasteners during this process for the 2007 Buick Rendezvous? Posted by Customer
    A:
    It is crucial to replace any fasteners that become loose or are removed to prevent loss of vehicle control and personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the front wheel bearing and hub for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the next step after reconnecting the ABS electrical connector for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Install the brake rotor and the rear caliper and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be checked before removing the wheel bearing/hub for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Ensure the wheel drive shaft outer seal/boot is undamaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done with the wheel bearing/hub bolts for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove and discard the wheel bearing/hub bolts, taking care not to damage the wheel drive shaft outer seal/boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done after using the J 42129 to push the wheel drive shaft out for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove and discard the wheel bearing/hub bolts before taking the J 42129 off the hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What tool is used to push the wheel drive shaft out of the wheel bearing/hub for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Use the J 28733-8.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How do you install the new wheel bearing/hub for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the new wheel bearing/hub, replacing the fasteners with new ones, and tighten them to 130 Nm (96 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be removed after raising for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the tires and wheels, followed by the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the final step before completing the process for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Install the tires and wheels before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What components need to be removed after the tires and wheels for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the rear caliper and bracket, followed by the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What should be reinstalled after the wheel bearing/hub for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the brake rotor and caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be done if the wheel bearing is damaged for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Replace the complete hub and bearing assembly, as the wheel bearing is integrated into the non-serviceable rear wheel hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How should the new wheel bearing/hub be installed for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Place the new wheel bearing/hub with the splash shield as noted during removal and replace the fasteners with new ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be removed after raising for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the tires and wheels, followed by the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What should be removed from the rear wheel bearing/hub for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the park brake actuator from the rear wheel bearing/hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the park brake actuator to the rear wheel bearing/hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the first step to replace the front wheel bearing/hub for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Begin by raising and supporting the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What is the next step after removing the brake components for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Remove the wheel drive shaft nut and attach the J 28733-B Front Hub Spindle Remover to the wheel bearing/hub using three wheel nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How should the new wheel bearing/hub be installed for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Install the new wheel bearing/hub and replace the fasteners with new ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Hub
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Hub & Bearing 88964096 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88964096 Front Hub & Bearing is available in the market under the name GM Wheel Bearing, Wheel Hub. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88964096 Front Hub & Bearing fits certain Chevrolet Impala, Monte Carlo, Venture models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix, Aztek, Montana models.
The original GM component designated by manufacturer part number 88964096 maintains top performance when functioning as the Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing. unit at its Front. The component 88964096 is constructed from durable material and its dimensions span 7.0 x 7.0 x 6.8 inches while weighing 8.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub & Bearing; Hub; Hub, Front Wheel. The part 88964096 has available replacement options 89047803, 12413005, 12413097. Each vehicle needs 2 units of the part marked as SKU 88964096. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.