OEM 2010 Chevrolet Impala Wheel Bearing

Hub Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

  • 2010 Chevy Impala Wheel Bearing - 13585741
    2010 Chevy Impala Wheel Bearing Diagram - 13585741
    View related parts

    2010 Chevrolet Impala Hub & Bearing, Rear

    Part Number: 13585741
    $178.89 MSRP: $320.88
    You Save: $141.99 (45%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
    • Position: Rear
    • Item Weight: 11.10 Pounds
    • Item Dimensions: 9.5 x 8.2 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 13585741
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
  • 2010 Chevy Impala Wheel Bearing - 84641365
    2010 Chevy Impala Wheel Bearing Diagram - 84641365
    View related parts

    2010 Chevrolet Impala Hub Assembly, Front

    Part Number: 84641365
    $217.28 MSRP: $425.44
    You Save: $208.16 (49%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
    • Position: Front
    • Replaced by: 19433930
    • Item Weight: 10.20 Pounds
    • Condition: New
    • SKU: 84641365
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala Wheel Bearing

With a comprehensive array of OEM 2010 Chevrolet Impala Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Wheel Bearing Parts Questions & Experts Answers

  • Q: How to replace the front wheel bearing and hub on 2010 Chevrolet Impala?
    A: First support the vehicle at its proper height to work on the front Wheel Bearing and hub. Separate the Wheel Speed Sensor electrical connector with the bracket when it is installed. Take off both components: the drive shaft nut from the front wheel and the brake rotor. Fasten three wheel nuts to the j 42129 wheel hub remover before slowly pushing the drive shaft out of the Wheel Bearing/hub through j 42129. Take off the j 42129 tool from the hub after you remove the Wheel Bearing/hub bolts to prevent damage to the wheel drive shaft boot and seal. Remove the Wheel Bearing/hub unit from its location and keep track of the splash shield's proper position for reinstalling work. Place the new Wheel Bearing/hub assembly using the recorded shield location while replacing all fasteners with fresh ones due to safety requirements. The new Wheel Bearing hub bolts receive a torque setting of 130 nm (96 lb ft). Put back the brake rotor and caliper with the drive shaft nut installation as the connector clip needs to meet its bracket connection point. Reconnect the wheel sensor electric wire to its mounting place and the cable housing. Position the tire and wheel unit then lower the car.

Related 2010 Chevrolet Impala Parts