How to replace the Body Control Module (BCM) on 2005 Chevrolet Malibu?

Start by taking off the negative Battery Cable power supply. First take away the right console panel and loosen up the screws that attach the bcm. Unplug bcm wire connectors from the circuit then take out the bcm device. Put the bcm in its proper position and connect all bcm wire harness connectors. Secure the bcm with its screws by applying 2.5 n.m (22 lb in) torque. Reposition the right console trim panel while reconnecting the battery negative lead. Set up the new bcm system according to its programming instructions.

OEM 2005 Chevrolet Malibu Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
2005 Chevrolet Malibu Control Module
Part Number: 15234845
Product Specifications
- Other Name: Module Assembly-Body Control; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Replaces: 10355512, 22732979, 22734684
- Item Weight: 1.90 Pounds
- Item Dimensions: 12.4 x 9.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15234845
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS

2005 Chevrolet Malibu Body Control Module

With a comprehensive array of OEM 2005 Chevrolet Malibu Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Malibu Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the Body Control Module (BCM) on 2005 Chevrolet Malibu?
A: Start by taking off the negative Battery Cable power supply. First take away the right console panel and loosen up the screws that attach the bcm. Unplug bcm wire connectors from the circuit then take out the bcm device. Put the bcm in its proper position and connect all bcm wire harness connectors. Secure the bcm with its screws by applying 2.5 n.m (22 lb in) torque. Reposition the right console trim panel while reconnecting the battery negative lead. Set up the new bcm system according to its programming instructions.