How to Properly Service and Repair the Steering Knuckle on 2005 Chevrolet Malibu?

The replacement of a Steering Knuckle begins with vehicle lifting and proper stabilization. First, remove the Wheel Bearing followed by the outer tie rod to knuckle nut. The universal steering linkage puller (J 24319-B) functions to disconnect the tie rod from the Steering Knuckle. Start by uninstalling the bolts of both the lower Control Arm and the strut to Steering Knuckle assembly before removing the Steering Knuckle block from the car. During installation process install the Steering Knuckle on the strut assembly and the optional abs harness bracket while tightening all bolts and nuts to 120 nm (89 ft. Lbs.). First guide the axle through the Steering Knuckle and install both the lower Control Arm and outer tie rod to the Steering Knuckle before tightening the nut to 20 nm (15 ft. Lbs.). Finish by turning the nut an additional 180 degrees and verifying the torque requirement at 50 nm (37 ft. Lbs.). Install the Wheel Bearing and brake rotor and brake caliper along with the front wheels onto the vehicle before lowering it for a road test to check alignment and resolve any lead or pull symptoms.

OEM 2005 Chevrolet Malibu Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2005 Chevrolet Malibu Knuckle, Green Line, Driver Side Part Number: 19303853
$287.92 MSRP: $457.11
You Save: $169.19 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 21995733, 22705299, 25872803
- Item Weight: 6.50 Pounds
- Item Dimensions: 14.4 x 14.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Knuckle, Green Line, Passenger Side Part Number: 19303854
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15225210, 25872804, 22705300, 21995734
- Item Weight: 6.40 Pounds
- Item Dimensions: 11.8 x 11.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303854
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Knuckle, Green Line, Rear Driver Side Part Number: 19303839
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaces: 15942149, 22669733
- Item Weight: 6.80 Pounds
- Item Dimensions: 15.9 x 11.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Malibu Knuckle, Green Line, Rear Passenger Side Part Number: 19303840
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 15942150, 22669734
- Item Weight: 6.40 Pounds
- Item Dimensions: 6.6 x 15.4 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2005 Chevrolet Malibu Steering Knuckle

With a comprehensive array of OEM 2005 Chevrolet Malibu Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Malibu Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Malibu Steering Knuckle Parts and Q&A

Q: How to Properly Service and Repair the Steering Knuckle on 2005 Chevrolet Malibu?
A: The replacement of a Steering Knuckle begins with vehicle lifting and proper stabilization. First, remove the Wheel Bearing followed by the outer tie rod to knuckle nut. The universal steering linkage puller (J 24319-B) functions to disconnect the tie rod from the Steering Knuckle. Start by uninstalling the bolts of both the lower Control Arm and the strut to Steering Knuckle assembly before removing the Steering Knuckle block from the car. During installation process install the Steering Knuckle on the strut assembly and the optional abs harness bracket while tightening all bolts and nuts to 120 nm (89 ft. Lbs.). First guide the axle through the Steering Knuckle and install both the lower Control Arm and outer tie rod to the Steering Knuckle before tightening the nut to 20 nm (15 ft. Lbs.). Finish by turning the nut an additional 180 degrees and verifying the torque requirement at 50 nm (37 ft. Lbs.). Install the Wheel Bearing and brake rotor and brake caliper along with the front wheels onto the vehicle before lowering it for a road test to check alignment and resolve any lead or pull symptoms.