ChevyParts
My Garage
My Account
Cart
OEM 2005 Chevrolet Monte Carlo Turn Signal Switch
Turn Signal Indicator Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Turn Signal Switches found
Product Specifications- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26093873, 26073612, 26085930
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.1 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88964580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Turn/Wiper Lever; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26073613, 26093874, 26085931
- Item Weight: 2.30 Pounds
- Item Dimensions: 10.8 x 6.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88964581
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Monte Carlo Turn Signal Switch
With a comprehensive array of OEM 2005 Chevrolet Monte Carlo Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Monte Carlo Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Chevrolet Monte Carlo Parts Questions & Experts Answers
- Q: How to replace the Turn Signal Switch on 2005 Chevrolet Monte Carlo?A: Disable the Restraints system before you start replacing the turn signal switch by taking off upper and lower trim pieces. Afterward reinstall the abrasion sleeve and remember how the connectors are positioned for reassembly. Unplug the wire harness assembly from its mounting strap then take out the turn signal and multifunction switch assembly connector from the SIR system coil plug. Remove the assembly turn signal and multifunction switch unit from steering column tilt head assembly by sliding out the two connectors from bulkhead connector and taking away its two pan head tapping screws. Position the turn signal and multifunction switch assembly onto the steering column tilt head assembly with its electrical contact sitting on the turn signal cancel cam assembly. Connect the assembly using two pan head tapping screws and insert the top screw by 3 Nm (27 inch-lbs) torque and the side screw by 7 Nm (62 inch-lbs). Pass the turn signal and multifunction switch assembly connectors smoothly through bulkhead connector and fasten them to SIR coil connector. Place the abrasion sleeve back on the steering column wire harness bundle following the right placement of both the ignition lock cylinder case wires and connector. Insert the wire harness assembly into the wire harness strap then replace the upper and lower trim covers along with activating the Restraints system.
Related 2005 Chevrolet Monte Carlo Parts
2005 Chevrolet Monte Carlo Body Control Module
2005 Chevrolet Monte Carlo Brake Light Switch
2005 Chevrolet Monte Carlo Cruise Control Switch
2005 Chevrolet Monte Carlo Dimmer Switch
2005 Chevrolet Monte Carlo Door Lock Switch
2005 Chevrolet Monte Carlo Hazard Warning Switch
2005 Chevrolet Monte Carlo Headlight Switch
2005 Chevrolet Monte Carlo Ignition Switch
2005 Chevrolet Monte Carlo Instrument Cluster
2005 Chevrolet Monte Carlo Speedometer
2005 Chevrolet Monte Carlo Tailgate Lock Actuator Motor
2005 Chevrolet Monte Carlo Wiper Switch