How to replace the rear crankshaft seal on 2005 Chevrolet Trailblazer?

Make sure you take out the transmission and Flywheel before you can replace the crankshaft rear oil seal. Pry the crankshaft rear oil seal out of the rear oil seal housing using the proper tool, making sure you don't harm the crankshaft or seal bore. After that, use rear seal installer (J 44227) alongside the plastic sleeve that comes with the new seal to fit the new crankshaft rear oil seal. Once you have installed the seal, take out the rear seal installer (J 44227) and toss the plastic sleeve aside. When done, put the transmission and the Flywheel in their place.

OEM 2005 Chevrolet Trailblazer Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

View related parts
2005 Chevrolet Trailblazer Rear Main Seal
Part Number: 12581717
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 24577096
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.7 x 5.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12581717
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS

2005 Chevrolet Trailblazer Crankshaft Seal

With a comprehensive array of OEM 2005 Chevrolet Trailblazer Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Trailblazer Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Trailblazer Crankshaft Seal Parts Questions & Experts Answers

Q: How to replace the rear crankshaft seal on 2005 Chevrolet Trailblazer?
A: Make sure you take out the transmission and Flywheel before you can replace the crankshaft rear oil seal. Pry the crankshaft rear oil seal out of the rear oil seal housing using the proper tool, making sure you don't harm the crankshaft or seal bore. After that, use rear seal installer (J 44227) alongside the plastic sleeve that comes with the new seal to fit the new crankshaft rear oil seal. Once you have installed the seal, take out the rear seal installer (J 44227) and toss the plastic sleeve aside. When done, put the transmission and the Flywheel in their place.