How to replace the engine oil pressure switch on 2005 Chevrolet Uplander?

Battery disconnect procedures should begin with negative cable removal before sensor and switch replacement. First remove the electrical connector from the engine oil pressure sensor and afterward disconnect the engine Oil Pressure Switch. Start by following thenotations in the fastener notice of service precautions before installing and tightening the engine Oil Pressure Switch to 16 nm (12 ft. Lbs.). Once complete attach the electrical connector to the engine Oil Pressure Switch and finish by reattaching the battery negative cable.

OEM 2005 Chevrolet Uplander Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Chevrolet Uplander Pressure Switch
Part Number: 12635954
$30.52 MSRP: $50.28
You Save: $19.76 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Engine Oil Pressure Indicator; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Switch, Engine Oil Pressure/Temperature
- Replaced by: 19436252
- Replaces: 12575007, 25036853
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635954
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS

2005 Chevrolet Uplander Oil Pressure Switch

With a comprehensive array of OEM 2005 Chevrolet Uplander Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Oil Pressure Switch Parts Questions & Experts Answers

Q: How to replace the engine oil pressure switch on 2005 Chevrolet Uplander?
A: Battery disconnect procedures should begin with negative cable removal before sensor and switch replacement. First remove the electrical connector from the engine oil pressure sensor and afterward disconnect the engine Oil Pressure Switch. Start by following thenotations in the fastener notice of service precautions before installing and tightening the engine Oil Pressure Switch to 16 nm (12 ft. Lbs.). Once complete attach the electrical connector to the engine Oil Pressure Switch and finish by reattaching the battery negative cable.