How to replace the heated oxygen sensor (HO2S) at Position 1 on 2005 Chevrolet Uplander?

The replacement of heated Oxygen Sensor (HO2S) at position 1 demands the use of j 39194-b heated Oxygen Sensor wrench (J 39194-B) for the removal and installation process. Cut off the ho2s 1 harness connector after which properly extract the ho2s 1 away from the Exhaust Manifold while keeping it away from in-line electrical connector contamination and uncontrolled particles on the louvered end. Before installing the heated Oxygen Sensor apply anti-seize compound gm p/n 5613695 (or equivalent) to its threaded area since this special compound made of graphite and glass beads helps make future sensor removal easier. Fasten the heated Oxygen Sensor by torquing it to 41 n.m (30 lb ft). Reconnect the sensor electrical connector after lowering the vehicle while verifying that the peripheral seal on the vehicle harness connector stays sealed to stop water leakage. The repair of wiring and connectors and terminals must be avoided while contact cleaners should be prevented from use on sensors and vehicle harness connectors because it adversely affects sensor performance.

OEM 2005 Chevrolet Uplander Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2005 Chevrolet Uplander Oxygen Sensor
Part Number: 12569429
$53.63 MSRP: $108.94
You Save: $55.31 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12569429
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Uplander Oxygen Sensor
Part Number: 19209807
$87.79 MSRP: $178.30
You Save: $90.51 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor; Front Oxygen Sensor
- Replaces: 12570149, 12574924, 12572772
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Oxygen Sensor
Part Number: 12597878
$50.56 MSRP: $102.72
You Save: $52.16 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.1 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS

2005 Chevrolet Uplander Oxygen Sensor

With a comprehensive array of OEM 2005 Chevrolet Uplander Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Parts Questions & Experts Answers

Q: How to replace the heated oxygen sensor (HO2S) at Position 1 on 2005 Chevrolet Uplander?
A: The replacement of heated Oxygen Sensor (HO2S) at position 1 demands the use of j 39194-b heated Oxygen Sensor wrench (J 39194-B) for the removal and installation process. Cut off the ho2s 1 harness connector after which properly extract the ho2s 1 away from the Exhaust Manifold while keeping it away from in-line electrical connector contamination and uncontrolled particles on the louvered end. Before installing the heated Oxygen Sensor apply anti-seize compound gm p/n 5613695 (or equivalent) to its threaded area since this special compound made of graphite and glass beads helps make future sensor removal easier. Fasten the heated Oxygen Sensor by torquing it to 41 n.m (30 lb ft). Reconnect the sensor electrical connector after lowering the vehicle while verifying that the peripheral seal on the vehicle harness connector stays sealed to stop water leakage. The repair of wiring and connectors and terminals must be avoided while contact cleaners should be prevented from use on sensors and vehicle harness connectors because it adversely affects sensor performance.

Related 2005 Chevrolet Uplander Parts

Alternate Year Models

2006 Chevrolet Uplander Oxygen Sensor