How to replace the brake master cylinder on 2005 Chevrolet Venture?

When changing the Brake Master Cylinder, begin by removing the electrical connection from the Brake Fluid Level Sensor and the brake pipes from the master cylinder, putting rubber caps or plugs on the brake pipe fittings to keep brake fluid from getting out and getting dirty. After that, put plugs on the exposed brake pipe fittings, loosen and take off the mounting nuts, and take the master cylinder out of the vehicle with all brake fluid removed. Bench bleed the master cylinder before you screw it onto the Brake Booster. Once the mounting nuts are set at 29 nm (21 ft. Lbs.), get rid of the plugs from the brake pipes and screw them onto the master cylinder, hand tightening each fitting to 3 don't forget to join the electrical connector to the Brake Fluid Level Sensor and bleed the whole brake system afterward.

OEM 2005 Chevrolet Venture Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2005 Chevrolet Venture Master Cylinder
Part Number: 18022002
Product Specifications
- Other Name: Cylinder Kit, Brake Master; Overhaul Kit; Master Cylinder Repair Kit
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18022002
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Master Cylinder
Part Number: 19209260
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18060780, 18026277
- Item Weight: 2.60 Pounds
- Item Dimensions: 9.7 x 7.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209260
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Brake Master Cylinder

With a comprehensive array of OEM 2005 Chevrolet Venture Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Brake Master Cylinder Parts Questions & Experts Answers

Q: How to replace the brake master cylinder on 2005 Chevrolet Venture?
A: When changing the Brake Master Cylinder, begin by removing the electrical connection from the Brake Fluid Level Sensor and the brake pipes from the master cylinder, putting rubber caps or plugs on the brake pipe fittings to keep brake fluid from getting out and getting dirty. After that, put plugs on the exposed brake pipe fittings, loosen and take off the mounting nuts, and take the master cylinder out of the vehicle with all brake fluid removed. Bench bleed the master cylinder before you screw it onto the Brake Booster. Once the mounting nuts are set at 29 nm (21 ft. Lbs.), get rid of the plugs from the brake pipes and screw them onto the master cylinder, hand tightening each fitting to 3 don't forget to join the electrical connector to the Brake Fluid Level Sensor and bleed the whole brake system afterward.