How to replace the front coil springs on a front-wheel-drive without an axle on 2005 Chevrolet Venture?

To replace the coil spring on the front-wheel vehicle without axle, start with raising and supporting the vehicle, followed by removing the wheel and tires, brake calipers from the vehicle and parking brake cable mounting bracket.actions, also remover brake caliper mounting bracket from the vehicle. Detach the abs electrical connector and.removelistener the mounting bracket. Support the lower Control Arm with a utility jack and then unfasten the stabilizer link from the lower Control Arm. Lose and slide the j 41820 Ball Joint/stud separator (J 41820) to unstick the Ball Joint from the knuckle and flatten the lower Control Arm with the utility jack to produce coil spring tension right before removing the coil spring. For the purpose of installation, insert a new coil spring and lift the lower Control Arm using a utility jack to boost the suspension. Reconnect the Ball Joint to the knuckle using the j 41820 (J 41820), attach the stabilizer link to the lower Control Arm, and jacking the lower Control Arm again using the utility jack. Replace the abs electrical connector pillar, join the abs electrical connector, after which install the brake caliper pillar mounting bracket, parking brake cable mounting bracket and Brake Calipers. Finally, recheck the vehicle by installing the wheel and tire assemblies and reducing the vehicle.

OEM 2005 Chevrolet Venture Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Coil Springs found

View related parts
2005 Chevrolet Venture Coil Spring, Rear
Part Number: 22132425
$59.59 MSRP: $144.50
You Save: $84.91 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring, Rear
- Position: Rear
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.4 x 6.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22132425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Coil Spring, Front
Part Number: 22133043
$5.22 MSRP: $124.32
You Save: $119.10 (96%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.4 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22133043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Coil Spring, Front
Part Number: 22133038
$74.40 MSRP: $104.15
You Save: $29.75 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Front; Coil Springs; Spring
- Position: Front
- Replaces: 22133036
- Item Weight: 7.20 Pounds
- Item Dimensions: 14.8 x 7.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22133038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Coil Spring, Rear
Part Number: 10306378
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
- Item Weight: 4.40 Pounds
- Item Dimensions: 12.0 x 4.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10306378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Coil Spring, Rear
Part Number: 22132417
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
- Replaces: 22132416, 22132415
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.2 x 6.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22132417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Coil Springs

With a comprehensive array of OEM 2005 Chevrolet Venture Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Coil Springs Parts Questions & Experts Answers

Q: How to replace the front coil springs on a front-wheel-drive without an axle on 2005 Chevrolet Venture?
A: To replace the coil spring on the front-wheel vehicle without axle, start with raising and supporting the vehicle, followed by removing the wheel and tires, brake calipers from the vehicle and parking brake cable mounting bracket.actions, also remover brake caliper mounting bracket from the vehicle. Detach the abs electrical connector and.removelistener the mounting bracket. Support the lower Control Arm with a utility jack and then unfasten the stabilizer link from the lower Control Arm. Lose and slide the j 41820 Ball Joint/stud separator (J 41820) to unstick the Ball Joint from the knuckle and flatten the lower Control Arm with the utility jack to produce coil spring tension right before removing the coil spring. For the purpose of installation, insert a new coil spring and lift the lower Control Arm using a utility jack to boost the suspension. Reconnect the Ball Joint to the knuckle using the j 41820 (J 41820), attach the stabilizer link to the lower Control Arm, and jacking the lower Control Arm again using the utility jack. Replace the abs electrical connector pillar, join the abs electrical connector, after which install the brake caliper pillar mounting bracket, parking brake cable mounting bracket and Brake Calipers. Finally, recheck the vehicle by installing the wheel and tire assemblies and reducing the vehicle.