OEM 2005 Chevrolet Venture Rocker Arm

2005 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to service and repair the valve rocker arm and push rod on 2005 Chevrolet Venture?

  A: The repair process of valve Rocker Arm and push rod requires a torque angle meter (J 36660-A) as the fundamental tool. Begin the removal work by unscrewing the valve Rocker Arm covers and subsequently unscrewing each Rocker Arm bolt. Remove all valve Rocker Arm components as well as all Pushrod components. The installation requires prelube gm p/n 1052365 product or equivalent coatings as end treatments for push rods. Intake valve push rods with 144 mm (5.75 inches) length and yellow marking need installation at their original positions before exhaust valve push rods with 152.5 mm (6.0 inches) length and green marking. Both surfaces of the rocker arms need a coating with the identical prelube material. Affix the valve Rocker Arm bolts to their specified torque of 19 nm (14 ft. Lbs.) with 30 degrees angle through use of the torque angle meter (J 36660-A) then replace the valve Rocker Arm covers.