How to replace the front steering knuckle on 2005 Chevrolet Venture?

To change the front Steering Knuckle, start by lifting and supporting properly the vehicle, remove the tire and wheel assembly. Next you remove the front wheel drive shaft bearing and the front lower control arm ball stud. Detach the outer Tie Rod End from the Steering Knuckle using the universal steering linkage puller (J 24319-B). Secure the strut to the knuckle and unbolt the strut on the knuckle and take the knuckle out of the vehicle. For installation, mount the knuckle again to the vehicle and instal the bolts, linking the strut to the knuckle and make sure to tighten them up to 123 nm (90 lb-ft). Re-join the outer tie rod to the Steering Knuckle, attach the front lowermost control arm screw to the knuckled and rere-install the front wheel drive shaft bearing. Lastly, reinstall the tire and wheel assembly and bring down the vehicle.

OEM 2005 Chevrolet Venture Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2005 Chevrolet Venture Knuckle, Driver Side
Part Number: 23127629
$281.50 MSRP: $442.93
You Save: $161.43 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Knuckle, Passenger Side
Part Number: 22990753
$268.07 MSRP: $421.79
You Save: $153.72 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Knuckle, Rear Driver Side
Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 11.8 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Knuckle, Rear Passenger Side
Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 11.4 x 11.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Steering Knuckle

With a comprehensive array of OEM 2005 Chevrolet Venture Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Steering Knuckle Parts Questions & Experts Answers

Q: How to replace the front steering knuckle on 2005 Chevrolet Venture?
A: To change the front Steering Knuckle, start by lifting and supporting properly the vehicle, remove the tire and wheel assembly. Next you remove the front wheel drive shaft bearing and the front lower control arm ball stud. Detach the outer Tie Rod End from the Steering Knuckle using the universal steering linkage puller (J 24319-B). Secure the strut to the knuckle and unbolt the strut on the knuckle and take the knuckle out of the vehicle. For installation, mount the knuckle again to the vehicle and instal the bolts, linking the strut to the knuckle and make sure to tighten them up to 123 nm (90 lb-ft). Re-join the outer tie rod to the Steering Knuckle, attach the front lowermost control arm screw to the knuckled and rere-install the front wheel drive shaft bearing. Lastly, reinstall the tire and wheel assembly and bring down the vehicle.