OEM 2005 Chevrolet Venture Timing Cover

2005 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the engine front timing cover on 2005 Chevrolet Venture?

  A: Draining engine cooling system and engine oil must be the first step before replacing the front engine cover. The crankshaft balancer, drive belt tensioner, and Power Steering Pump with lines require removal but the pump should stay set aside. Separate the pipe of the thermostat bypass and hose of the radiator outlet from the front cover while removing the coolant pump pulley. The first step involves loosening the engine front cover bolts so the technician can remove the cover along with its gasket. Check the engine front cover alongside the crankshaft front oil seal and gasket sealing surface for any indication of damage. When replacing the engine front cover owners must first remove the drive belt shield together with the Crankshaft Position Sensor and coolant pump. The Crankshaft Position Sensor and coolant pump should be installed onto the engine front cover before securing the drive belt shield. Tighten the drive belt shield bolt to a torque of 10 nm while using 89 inch lbs. As the reference. Before adding the engine front cover use gm p/n 12346004 or equivalent sealer to both lower gasket tabs then install the front cover. Tighten the engine front cover bolts to 55 nm (41 ft. Lbs.), bolt to 47 nm (35 ft. Lbs.)tighten the bolts to 21 nm (16 ft. Lbs.). Reinstall the lower and upper Crankshaft Position Sensor wiring harness brackets, coolant pump pulley, radiator outlet hose and thermostat bypass pipe. Reinstallation of the drive belt tensioner along with Power Steering Pump and crankshaft balancer comes next before filling the engine with fresh engine oil and cooling system with new engine coolant.