How to replace a one-piece Drive Shaft on 2005 GMC Canyon?

The initial step to replace this propeller shaft requires placing the transmission in neutral position before releasing any currently applied park brake. Support the raised vehicle before you mark the rear Universal Joint position to the Drive Shaft flange. Once the retaining bolts are removed together with clamps you should proceed to take out the propeller shaft from the pinion drive flange and the transmission/Transfer Case. The u-joint bearing caps need protection against separation by using tape or rubber bands. The first step of installation requires removing tape and rubber band from the u-joint before aligning the propeller shaft within the transmission/Transfer Case with pinion flange reference marks. Install clamps onto the components along with retaining bolts before tightening these bolts to 20 nm (15 ft. Lbs.), which should conclude with lowering the vehicle.

OEM 2005 GMC Canyon Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Drive Shafts found

View related parts
2005 GMC Canyon Drive Shaft, Front Part Number: 25843685
$582.86 MSRP: $945.95
You Save: $363.09 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15104642
- Item Weight: 15.30 Pounds
- Item Dimensions: 35.0 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Drive Shaft Part Number: 25787948
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front and Rear
- Replaces: 15236807
- Item Weight: 55.90 Pounds
- Item Dimensions: 92.9 x 6.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Drive Shaft Part Number: 22811801
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25787945
- Item Weight: 14.50 Pounds
- Item Dimensions: 79.4 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22811801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Drive Shaft Part Number: 25787947
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15116624
- Item Weight: 15.60 Pounds
- Item Dimensions: 65.3 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2005 GMC Canyon Drive Shaft Part Number: 15286715
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Item Weight: 18.80 Pounds
- Item Dimensions: 61.0 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Drive Shaft Part Number: 25787946
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 17.90 Pounds
- Item Dimensions: 50.5 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2005 GMC Canyon Axle Assembly, Front Part Number: 10399597
Product Specifications
- Other Name: Axle Assembly-Front (3.73 Ratio); Axle Shaft
- Position: Front
- Condition: New
- SKU: 10399597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS

2005 GMC Canyon Drive Shaft

With a comprehensive array of OEM 2005 GMC Canyon Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Canyon Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Canyon Drive Shaft Parts and Q&A

Q: How to replace a one-piece Drive Shaft on 2005 GMC Canyon?
A: The initial step to replace this propeller shaft requires placing the transmission in neutral position before releasing any currently applied park brake. Support the raised vehicle before you mark the rear Universal Joint position to the Drive Shaft flange. Once the retaining bolts are removed together with clamps you should proceed to take out the propeller shaft from the pinion drive flange and the transmission/Transfer Case. The u-joint bearing caps need protection against separation by using tape or rubber bands. The first step of installation requires removing tape and rubber band from the u-joint before aligning the propeller shaft within the transmission/Transfer Case with pinion flange reference marks. Install clamps onto the components along with retaining bolts before tightening these bolts to 20 nm (15 ft. Lbs.), which should conclude with lowering the vehicle.