Make sure this part fits

GM 15286715
Drive Shaft

2004-2012 GM

Customer Questions & Expert Answers (15)
GM 15286715 Drive Shaft
GM 15286715 Drive Shaft
  • Part Description
    Shaft Assembly-Propeller; Driveshaft
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15286715 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15286715 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do after marking the rear universal joint for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the retaining bolts and clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the torque specification for the propeller shaft to pinion flange bolts for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Tighten them to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to replace the one-piece propeller shaft for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Place the transmission in neutral and release the park brake if it is applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after raising and supporting the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Ensure proper alignment of all U-Joints to the transmission, center bearing support, and rear drive axle pinion flange by rotating the propeller shafts until all external clips are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    How should the rear propeller shaft be marked for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Mark the rear propeller shaft to the pinion drive flange, center bearing support, and transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after tightening the bolts for the front propeller U-joint clamps for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to replace the two-piece propeller shaft for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Place the transmission in neutral and release the park brake if it is applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to replace the one-piece propeller shaft for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Place the transmission in neutral and release the park brake if it is applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the final step after tightening the bolts for the 2010 GMC Canyon? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after installing the center bearing for the 2008 GMC Canyon? Posted by Customer
    A:
    Rotate the propeller shaft to align the marks with the pinion yoke, then remove the tape or rubber band.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be marked before removing the propeller shaft for the 2008 GMC Canyon? Posted by Customer
    A:
    The front U-joint to the pinion yoke on the front differential and the relationship of the rear U-joint to the transfer case drive flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step in the installation process for the 2007 GMC Canyon? Posted by Customer
    A:
    Align the reference marks on the propeller shaft to the transmission and install it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after installing the front U-joint bolts and clamps for the 2009 GMC Canyon? Posted by Customer
    A:
    Align the reference marks on the rear U-joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be marked before removing the front propeller shaft for the 2010 GMC Canyon? Posted by Customer
    A:
    The front U-joint to the pinion yoke on the front differential and the relationship of the rear U-joint to the transfer case drive flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drive Shaft 15286715 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15286715 Drive Shaft is available in the market under the name GM Drive Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15286715 Drive Shaft fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15286715 maintains top performance when functioning as the Shaft Assembly-Propeller; Driveshaft unit. The component 15286715 is constructed from durable material and its dimensions span 61.0 x 4.1 x 4.2 inches while weighing 18.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Drive Shaft Assembly; Shaft, Propeller. The part 15286715 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.