Other Name: Belt, Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt, Drive
Replaces: 12557720, 12569349, 24503850
Item Weight: 0.80 Pounds
Item Dimensions: 3.5 x 21.5 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 12576452
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
Base, SLE | 6 Cyl 4.3 L GAS
2005 GMC Savana 2500 Drive Belt
With a comprehensive array of OEM 2005 GMC Savana 2500 Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 2500 Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 GMC Savana 2500 Parts Questions & Experts Answers
Q: How to replace the accessory drive belt on 2005 GMC Savana 2500?
A: The first step to replace the accessory Drive Belt begins with removing the air cleaner assembly along with the retaining bolt for the coolant recovery reservoir. Place the reservoir set aside. A breaker bar with hex-head socket should be used to turn the Drive Belt tensioner bolt clockwise until belt tension disappears. Disengage the belt from the pulleys together with the Drive Belt tensioner before you release tension slowly from the Drive Belt tensioner. The first step after removing the breaker bar and socket from the bolt of the tensioner is to perform cleanliness and surface inspection on all pulleys' belt areas. To install the Drive Belt feed it through the pulleys starting with the idler pulley excluded. The installation process requires a breaker bar with hex-head socket to loosen the belt tensioner bolt with clockwise rotation. Place the Drive Belt beneath the idler pulley then loosen the belt tensioner tension slowly by removing the breaker bar combined with the socket. Place and mount the coolant recovery reservoir afterward install its retaining bolt with proper torque set to 11 nm (97 inch lbs.). Reinstall the air cleaner assembly as the last step.