How to replace the exhaust heat shield on the frame on 2005 GMC Savana 2500?

The first step to replace the exhaust heat shield on the frame requires raising the vehicle and installing safety stands for adequate support. The first step requires removal of the exhaust system if needed followed by heat shield bolt removal until finally removing the heat shield from the frame. You should start installation by putting on the heat shield after that install the heat shield bolts while tightening the heat shield retainer bolt to 12 Nm (106 inch lbs.). Finally restore the exhaust system if needed then remove the safety stands and lower the vehicle to completion.

OEM 2005 GMC Savana 2500 Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Heat Shields found

View related parts
2005 GMC Savana 2500 Heat Shield, Driver Side
Part Number: 12562243
$69.20 MSRP: $90.00
You Save: $20.80 (24%)
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 3.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12562243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield, Passenger Side
Part Number: 12677664
$70.24 MSRP: $104.51
You Save: $34.27 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 12648338
- Item Weight: 3.20 Pounds
- Item Dimensions: 21.8 x 10.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12677664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield
Part Number: 15081303
$22.04 MSRP: $32.80
You Save: $10.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Rear Shield
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15081303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield, Passenger Side
Part Number: 15123700
$12.45 MSRP: $18.54
You Save: $6.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Muffler Shield
- Position: Passenger Side
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15123700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield
Part Number: 15748930
Product Specifications
- Other Name: Shield Assembly-Catalytic Converter Heat; Exhaust Heat Shield; Shield, Catalytic Converter
- Item Weight: 41.30 Pounds
- Item Dimensions: 39.2 x 25.5 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15748930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield, Driver Side
Part Number: 12574408
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield
- Position: Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 18.8 x 9.2 x 4.7 inches
- Condition: New
- SKU: 12574408
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, SLE | 6 Cyl 4.3 L GAS
View related parts
2005 GMC Savana 2500 Heat Shield, Passenger Side
Part Number: 12574322
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 21.4 x 8.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12574322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
- Base, SLE | 6 Cyl 4.3 L GAS

2005 GMC Savana 2500 Exhaust Heat Shield

With a comprehensive array of OEM 2005 GMC Savana 2500 Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 2500 Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Savana 2500 Parts Questions & Experts Answers

Q: How to replace the exhaust heat shield on the frame on 2005 GMC Savana 2500?
A: The first step to replace the exhaust heat shield on the frame requires raising the vehicle and installing safety stands for adequate support. The first step requires removal of the exhaust system if needed followed by heat shield bolt removal until finally removing the heat shield from the frame. You should start installation by putting on the heat shield after that install the heat shield bolts while tightening the heat shield retainer bolt to 12 Nm (106 inch lbs.). Finally restore the exhaust system if needed then remove the safety stands and lower the vehicle to completion.