Make sure this part fits

GM 12562243
Heat Shield, Driver Side

2003-2017 GM

Customer Questions & Expert Answers (49)
GM 12562243 Heat Shield, Driver Side
GM 12562243 Heat Shield, Driver Side
  • Part Description
    Shield, Exhaust Manifold; Exhaust Heat Shield
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$75.43 MSRP: $98.10
You Save: $22.67 (24%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2004-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2014 Chevrolet Express 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2017 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2017 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2004-2013 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12562243 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12562243 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the dash panel exhaust heat shield for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Place the dash panel exhaust heat shield (1 or 3) onto the dash panel studs, ensuring to follow fastener caution guidelines, then secure the nuts (2 or 4) and tighten them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step regarding the engine shield for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Position the engine shield to the frame and install and tighten the engine shield bolts to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the installation process for the dash panel exhaust heat shield for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Attach the dash panel exhaust heat shield (1 or 3) to the dash panel studs and secure it with the nuts (2 or 4), tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    First, remove the left wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the exhaust heat shield nuts for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the bolts for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Take off the heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after tightening the heat shield retainer bolt for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Reinstall the exhaust system as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield on the frame for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Raise and suitably support the vehicle with safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield on the frame for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Raise and suitably support the vehicle with safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the front exhaust pipe heat shield be installed for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Attach it to the body panel and secure it with rivets using the Rivet Gun (J 34940).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after removing the wheelhouse panels for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Take out the exhaust heat shield from the dash panel studs and remove it through the respective wheelwell.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done with the exhaust heat shield nuts for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the exhaust heat shield nuts and tighten them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and the heat shield itself from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the right wheelhouse liner for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed to take out the exhaust heat shield for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the exhaust heat shield nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Insert the heat shields through the respective wheelwell.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Position the new heat shield onto the exhaust manifold and secure it with the heat shield bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What are the final steps after installing the exhaust heat shields for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Reinstall the spare tire hoist and the exhaust muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you remove the exhaust heat shield for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the exhaust heat shield nuts and take out the exhaust heat shield from the dash panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done for a 6 1/2 ft box for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Take out the exhaust heat shield bolts and then remove the exhaust heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you remove the exhaust heat shield for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Take off the exhaust heat shield nuts and the exhaust heat shield from the dash panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What tool is used to remove the rivets from the heat shields for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    A 1/4 inch (6 mm) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the right side exhaust manifold heat shield for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    First, remove the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the rivets for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Take off the exhaust tailpipe heat shield from the body panel, followed by removing three muffler heat shield rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the order of removing the heat shields for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the exhaust tailpipe heat shield, followed by the muffler heat shield, and finally the front exhaust pipe heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, remove the exhaust muffler and the spare tire hoist.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    Which heat shields need to be removed for the 2004 GMC Savana 1500? Posted by Customer
    A:
    The exhaust tailpipe heat shield, muffler heat shield, and front exhaust pipe heat shield need to be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2010 GMC Savana 1500? Posted by Customer
    A:
    If applicable, reinstall the exhaust system and then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you begin the installation of the new heat shield for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Install the heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the procedure for positioning the oil pan skid plate on 2500 series for the 2010 GMC Yukon? Posted by Customer
    A:
    Position the oil pan skid plate, snug the 2 rear oil pan skid plate bolts, then install the 2 front oil pan skid plate bolts if equipped and tighten them to 28 Nm (21 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What caution should be taken during this process for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Caution should be exercised regarding fasteners to prevent vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield for the 2010 GMC Yukon? Posted by Customer
    A:
    First, remove the left wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and remove the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust manifold heat shield on the right side for the 2008 GMC Yukon? Posted by Customer
    A:
    Remove the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the right wheelhouse liner for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after completing the installation for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after attaching the heat shield for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Install the exhaust heat shield nuts and tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the new exhaust manifold heat shield be positioned for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Position the new exhaust manifold heat shield onto the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after installing the front exhaust pipe heat shield for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Install the muffler heat shield and secure it with rivets using the J34940.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed after raising for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Remove the exhaust heat shield nuts and both wheelhouse panels, following the procedures for the Front Wheelhouse Liner Replacement for both the right and left sides.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2010 GMC Yukon? Posted by Customer
    A:
    Tighten them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the process for installing the heat shield for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Insert the heat shield through the passenger side wheelwell, then attach it to the dash panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the process for installing the heat shield for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Insert the heat shield through the passenger side wheelwell, then attach it to the dash panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What tool is used to secure the heat shields during installation for the 2003 GMC Savana 2500? Posted by Customer
    A:
    The J 34940 Rivet Gun is used to secure the heat shields with rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield, Driver Side 12562243 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12562243 Heat Shield, Driver Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12562243 Heat Shield, Driver Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 12562243 maintains top performance when functioning as the Shield, Exhaust Manifold; Exhaust Heat Shield unit at its Driver Side. The component 12562243 is constructed from durable material and its dimensions span 9.2 x 3.4 x 20.6 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12562243 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.