How to replace the exhaust heat shield on the dash panel on GMC Yukon?

The first step to replace the dash panel Exhaust Heat Shield is to lift the vehicle then support it under its frame. First remove all bolts from the engine shield then detach the shield from its position. The removal process begins with extracting oil pan skid plate bolts as well as the skid plate from 1500 series models. The 2500 series requires bolt removal of both rear oil pan skid plate fasteners followed by removing the front oil pan skid plate fasteners and the skid plate if it is installed. The process requires discarding the Catalytic Converter if needed. Remove the dash panel Exhaust Heat Shield nuts (2 or 4) followed by installing the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs. Install the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs by tightly securing its nuts (2 or 4) with a torque of 9 nm (80 lb in). Reinstallation of the Catalytic Converter should proceed if required. The installation for 2500 series vehicles begins with placing the oil pan skid plate correctly before tightening the bolt at the rear position to 28 nm (21 lb ft). Additional elements for front bolts may exist which need installation and tightening to 28 nm (21 lb ft) if the vehicle has them. The 1500 series vehicles should have their oil pan skid plate both positioned and bolted with torque set at 28 nm (21 lb ft). Place the engine shield on the frame while installing its bolts to 20 nm (15 lb ft) before the vehicle reaches the ground.

OEM GMC Yukon Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Exhaust Heat Shields found

View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 12562243
$69.20 MSRP: $90.00
You Save: $20.80 (24%)
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield
Part Number: 55508999
$42.49 MSRP: $63.24
You Save: $20.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Heat Shield
Part Number: 22869577
$15.69 MSRP: $23.35
You Save: $7.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Replaces: 15853611, 25848480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Heat Shield, Passenger Side
Part Number: 12629340
$45.70 MSRP: $68.01
You Save: $22.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Passenger Side
Part Number: 84608641
$11.12 MSRP: $16.55
You Save: $5.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Front Pipe Heat; Exhaust Heat Shield; Converter Shield; Shield, Exhaust Pipe
- Position: Passenger Side
- Replaces: 23388776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield
Part Number: 84856597
$8.42 MSRP: $12.54
You Save: $4.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Heat Shield; Shield, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 84608640
$10.47 MSRP: $15.58
You Save: $5.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Front Pipe Heat; Exhaust Heat Shield; Converter Shield; Shield, Exhaust Pipe
- Position: Driver Side
- Replaces: 23388775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Passenger Side
Part Number: 12690817
$50.75 MSRP: $75.52
You Save: $24.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield
Part Number: 22869576
$14.45 MSRP: $21.51
You Save: $7.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Replaces: 15814468, 15740776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 12690554
$49.02 MSRP: $72.95
You Save: $23.93 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Front Driver Side
Part Number: 15169245
Product Specifications
- Other Name: Shield Assembly-Exhaust Front Heat (At Front Floor Panel); Exhaust Heat Shield; Shield, Exhaust Pipe
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Passenger Side
Part Number: 25848478
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 10388867, 15797116
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 15569501
Product Specifications
- Other Name: Shield Ex; Exhaust Heat Shield; Front Pipe Heat Shield; Shield, Exhaust Manifold; Shield, Exhaust Pipe
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Heat Shield
Part Number: 15736052
Product Specifications
- Other Name: Shield; Exhaust Heat Shield; Shield, Catalytic Converter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 GMC Yukon | SL, SLE | 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Front Pipe Heat Shield, Driver Side
Part Number: 15738547
Product Specifications
- Other Name: Shield; Shield, Exhaust Pipe
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Front Pipe Heat Shield, Passenger Side
Part Number: 15738548
Product Specifications
- Other Name: Shield; Shield, Exhaust Pipe
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Front Pipe Heat Shield, Passenger Side
Part Number: 15673260
Product Specifications
- Other Name: Shield; Shield, Exhaust(2 Wheel Drive); Shield, Exhaust Tail Pipe; Shield, Exhaust Pipe
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 12571683
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Heat Shield, Driver Side
Part Number: 25848476
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold; Shield, Exhaust Pipe
- Position: Driver Side
- Replaces: 15169247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Heat Shield
Part Number: 15291251
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

| Page 1 of 2 |Next >

1-20 of 27 Results

GMC Yukon Exhaust Heat Shield

Our website offers an extensive catalog of genuine GMC Yukon Exhaust Heat Shield at unbeatable prices. Every OEM GMC Yukon Exhaust Heat Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon Exhaust Heat Shield Parts Questions & Experts Answers

Heat Shield, Rear Driver Side
15102076
Q: How to replace the exhaust heat shield on the dash panel on GMC Yukon?
A: The first step to replace the dash panel Exhaust Heat Shield is to lift the vehicle then support it under its frame. First remove all bolts from the engine shield then detach the shield from its position. The removal process begins with extracting oil pan skid plate bolts as well as the skid plate from 1500 series models. The 2500 series requires bolt removal of both rear oil pan skid plate fasteners followed by removing the front oil pan skid plate fasteners and the skid plate if it is installed. The process requires discarding the Catalytic Converter if needed. Remove the dash panel Exhaust Heat Shield nuts (2 or 4) followed by installing the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs. Install the dash panel Exhaust Heat Shield (1 or 3) to the dash panel studs by tightly securing its nuts (2 or 4) with a torque of 9 nm (80 lb in). Reinstallation of the Catalytic Converter should proceed if required. The installation for 2500 series vehicles begins with placing the oil pan skid plate correctly before tightening the bolt at the rear position to 28 nm (21 lb ft). Additional elements for front bolts may exist which need installation and tightening to 28 nm (21 lb ft) if the vehicle has them. The 1500 series vehicles should have their oil pan skid plate both positioned and bolted with torque set at 28 nm (21 lb ft). Place the engine shield on the frame while installing its bolts to 20 nm (15 lb ft) before the vehicle reaches the ground.