Make sure this part fits

GM 15169245
Heat Shield, Front Driver Side

2007-2013 GM

Customer Questions & Expert Answers (17)
GM 15169245 Heat Shield, Front Driver Side
GM 15169245 Heat Shield, Front Driver Side
  • Part Description
    Shield Assembly-Exhaust Front Heat (At Front Floor Panel); Exhaust Heat Shield
  • Position
    Front Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007 Cadillac EscaladeBase8 Cyl 6.2 L GAS
    2007-2008 Cadillac Escalade ESVBase, Platinum8 Cyl 6.2 L GAS
    2007-2008 Cadillac Escalade EXTBase8 Cyl 6.2 L GAS
    2007-2008 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Silverado 1500LS, LT, LTZ, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007-2010 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2010 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2008 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2008 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L GAS
    2007 Chevrolet TahoeLS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15169245 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15169245 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the heat shield for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the spark plug wires.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the installation process for the dash panel exhaust heat shield for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Attach the dash panel exhaust heat shield (1 or 3) to the dash panel studs and secure it with the dash panel exhaust heat shield nuts (2 or 4), tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    First, remove the spark plug wires.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield on the dash panel for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the new heat shield onto the exhaust manifold and secure it with the heat shield bolts, tightening them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you attach the exhaust heat shield during installation for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Attach the exhaust heat shield to the dash panel studs, ensuring to follow the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    Which procedures should be followed for removing the wheelhouse panels for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Follow the procedures for the Front Wheelhouse Liner Replacement - Right Side (Chevrolet), Front Wheelhouse Liner Replacement - Right Side (GMC), and Front Wheelhouse Liner Replacement - Left Side (Chevrolet).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you attach the exhaust heat shield during installation for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Attach the exhaust heat shield to the dash panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the new heat shield for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and remove the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for the heat shield bolts for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Install the heat shield bolts, tightening them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield on the dash panel for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    First, raise and support the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Position the exhaust manifold heat shield onto the exhaust manifold and install the heat shield bolts, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Finally, reinstall the spark plug wires.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield, Front Driver Side 15169245 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15169245 Heat Shield, Front Driver Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15169245 Heat Shield, Front Driver Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15169245 maintains top performance when functioning as the Shield Assembly-Exhaust Front Heat (At Front Floor Panel); Exhaust Heat Shield unit at its Front Driver Side. The component 15169245 is constructed from durable material and its dimensions span 12.6 x 7.7 x 1.6 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield, Exhaust Pipe. The part 15169245 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.