Make sure this part fits

GM 25848476
Heat Shield, Driver Side

2007-2014 GM

Customer Questions & Expert Answers (24)
GM 25848476 Heat Shield, Driver Side
  • Part Description
    Shield-Exhaust Heat; Exhaust Heat Shield
  • Position
    Driver Side
  • Replaces
    15169247
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007-2014 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2014 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet TahoeHybrid, LS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25848476 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25848476 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the exhaust heat shield on the dash panel for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the engine shield bolts and the shield if necessary, and take off the oil pan skid plate bolts and the skid plate if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after installing the dash panel exhaust heat shield for the 2007 Cadillac Escalade? Posted by Customer
    A:
    If necessary, reinstall the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Reinstall the left wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Insert the heat shields back through the wheelwell.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step in the process for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you attach the exhaust heat shield during installation for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Attach the exhaust heat shield to the dash panel studs, ensuring to follow the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    First, remove the left wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the new heat shield onto the exhaust manifold and secure it with the heat shield bolts, tightening them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Position the new heat shield onto the exhaust manifold and secure it with the heat shield bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Finally, reinstall the spark plug wires.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield (4.3L) for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    First, remove the spark plug wires and reposition them out of the way if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the wheelhouse liner for the 2010 GMC Yukon? Posted by Customer
    A:
    Take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the new exhaust manifold heat shield be positioned for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Position the new exhaust manifold heat shield onto the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for the heat shield bolts for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Install the heat shield bolts, tightening them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2008 GMC Yukon? Posted by Customer
    A:
    Reinstall the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you take off the exhaust heat shield for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Take off the exhaust heat shield from the dash panel studs and remove it through the respective wheelwell.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after all installations for the 2010 GMC Yukon? Posted by Customer
    A:
    Reposition the engine shield to the frame, install and tighten the engine shield bolts to 20 Nm (15 lb ft), and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Finally, reinstall the spark plug wires.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the heat shield bolts for the 2010 GMC Yukon? Posted by Customer
    A:
    Tighten them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield, Driver Side 25848476 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25848476 Heat Shield, Driver Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25848476 Heat Shield, Driver Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 25848476 maintains top performance when functioning as the Shield-Exhaust Heat; Exhaust Heat Shield unit at its Driver Side. The component 25848476 is constructed from durable material and its dimensions span 10.7 x 8.9 x 8.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield, Exhaust Manifold; Shield, Exhaust Pipe. The part 25848476 has available replacement options 15169247. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.