Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS
GMC Yukon XL 2500 Exhaust Heat Shield
Our website offers an extensive catalog of genuine GMC Yukon XL 2500 Exhaust Heat Shield at unbeatable prices. Every OEM GMC Yukon XL 2500 Exhaust Heat Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Q: How to replace the exhaust heat shield on the dash panel on GMC Yukon XL 2500?
A: Begin replacement of the Exhaust Heat Shield (1, 3) on the dash panel by raising and properly supporting the vehicle. Start by removing both the engine shield bolts and shield if required before unfastening the Exhaust Heat Shield nuts and removing the Exhaust Heat Shield (1, 3) from dash panel studs. The installation of the Exhaust Heat Shield (1, 3) must be done by attaching it to dash panel studs while paying attention to the fastener notice listed in service precautions. Install the Exhaust Heat Shield nuts after attaching them to the dash panel studs then tighten them to 9 nm (80 inch lbs.). Retry the engine shield installation with its bolts after removal by fastening each bolt to 20 nm torque value (15 ft. Lbs.). Finally, lower the vehicle.