How to replace the exhaust heat shield on the body panel on 2010 Chevrolet Express 3500?

The replacement of the Exhaust Heat Shield on the body panel starts by elevating and stably supporting the vehicle. The installation of a suitable tail shaft plug during rear propeller shaft removal will help prevent fluid leakage. When replacing a one-piece propeller shaft personnel must perform appropriate steps which apply the same procedures for replacement when working with two-piece propeller shafts. The first step involves removal of heat shield rivets with a 1/4 inch (6 mm) drill bit, afterward strip away the exhaust tailpipe heat shield from the body panel followed by removing three muffler heat shield rivets but recall that the rear middle rivet has limited accessibility. The body must be lifted from the frame if required clearance needs to remove the heat shield while being repositioned for access to other components. The next step involves taking away the front exhaust pipe heat shield which is attached to the body panel. To install the front exhaust pipe heat shield users must place it onto the body panel and fasten it using a rivet gun (J 34940). First secure the muffler heat shield to the vehicle body through riveting steps with the rivet gun (J 34940) and then add the exhaust tailpipe heat shield that requires riveting with the same weapon (J 34940). Reinstall the propeller shaft after applying the needed replacement procedure between one-piece or two-piece setups then finish by lowering the vehicle.

OEM 2010 Chevrolet Express 3500 Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Exhaust Heat Shields found

View related parts
2010 Chevrolet Express 3500 Heat Shield, Driver Side
Part Number: 12668107
$52.77 MSRP: $78.55
You Save: $25.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 12634073
- Item Weight: 2.30 Pounds
- Item Dimensions: 15.3 x 4.3 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12668107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield, Driver Side
Part Number: 12562243
$69.20 MSRP: $90.00
You Save: $20.80 (24%)
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 3.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12562243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
2010 Chevrolet Express 3500 Heat Shield, Passenger Side
Part Number: 12634074
$32.39 MSRP: $48.20
You Save: $15.81 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield; Shield
- Position: Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.1 x 3.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12634074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield
Part Number: 15248169
$28.45 MSRP: $42.34
You Save: $13.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Muffler Shield; Shield, Exhaust Manifold
- Item Weight: 4.40 Pounds
- Item Dimensions: 45.1 x 12.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15248169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2010 Chevrolet Express 3500 Heat Shield, Driver Side
Part Number: 22858929
$20.50 MSRP: $30.51
You Save: $10.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 25830057
- Item Weight: 1.30 Pounds
- Item Dimensions: 27.2 x 18.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22858929
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L GAS
View related parts
2010 Chevrolet Express 3500 Heat Shield
Part Number: 15081303
$22.04 MSRP: $32.80
You Save: $10.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Rear Shield
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15081303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2010 Chevrolet Express 3500 Heat Shield, Passenger Side
Part Number: 15123700
$12.45 MSRP: $18.54
You Save: $6.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Muffler Shield
- Position: Passenger Side
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15123700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2010 Chevrolet Express 3500 Heat Shield
Part Number: 15081304
$11.11 MSRP: $16.54
You Save: $5.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Muffler Shield
- Item Weight: 3.20 Pounds
- Item Dimensions: 28.1 x 23.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15081304
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2010 Chevrolet Express 3500 Exhaust Shield
Part Number: 84056774
$7.37 MSRP: $10.98
You Save: $3.61 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Pipe
- Replaces: 25853899
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.1 x 8.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84056774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield, Driver Side
Part Number: 22793646
$143.61 MSRP: $214.66
You Save: $71.05 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat; Exhaust Heat Shield; Front Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 25830063
- Item Weight: 56.70 Pounds
- Item Dimensions: 46.9 x 22.0 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22793646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield, Passenger Side
Part Number: 25830062
$120.33 MSRP: $179.86
You Save: $59.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat; Exhaust Heat Shield; Front Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 63.60 Pounds
- Item Dimensions: 44.6 x 24.6 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25830062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield, Passenger Side
Part Number: 12610967
$42.03 MSRP: $62.54
You Save: $20.51 (33%)
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 21.4 x 12.2 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12610967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX
View related parts
2010 Chevrolet Express 3500 Heat Shield, Driver Side
Part Number: 12668106
$18.30 MSRP: $27.24
You Save: $8.94 (33%)
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield; Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 12625231
- Item Weight: 0.90 Pounds
- Item Dimensions: 15.2 x 10.8 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12668106
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
2010 Chevrolet Express 3500 Heat Shield, Passenger Side
Part Number: 12668108
$51.90 MSRP: $77.23
You Save: $25.33 (33%)
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 12624688
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.4 x 4.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12668108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 6.6 L DIESEL

2010 Chevrolet Express 3500 Exhaust Heat Shield

With a comprehensive array of OEM 2010 Chevrolet Express 3500 Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Express 3500 Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Express 3500 Exhaust Heat Shield Parts Questions & Experts Answers

Q: How to replace the exhaust heat shield on the body panel on 2010 Chevrolet Express 3500?
A: The replacement of the Exhaust Heat Shield on the body panel starts by elevating and stably supporting the vehicle. The installation of a suitable tail shaft plug during rear propeller shaft removal will help prevent fluid leakage. When replacing a one-piece propeller shaft personnel must perform appropriate steps which apply the same procedures for replacement when working with two-piece propeller shafts. The first step involves removal of heat shield rivets with a 1/4 inch (6 mm) drill bit, afterward strip away the exhaust tailpipe heat shield from the body panel followed by removing three muffler heat shield rivets but recall that the rear middle rivet has limited accessibility. The body must be lifted from the frame if required clearance needs to remove the heat shield while being repositioned for access to other components. The next step involves taking away the front exhaust pipe heat shield which is attached to the body panel. To install the front exhaust pipe heat shield users must place it onto the body panel and fasten it using a rivet gun (J 34940). First secure the muffler heat shield to the vehicle body through riveting steps with the rivet gun (J 34940) and then add the exhaust tailpipe heat shield that requires riveting with the same weapon (J 34940). Reinstall the propeller shaft after applying the needed replacement procedure between one-piece or two-piece setups then finish by lowering the vehicle.