Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
Position: Front
Fits the following GMC Models:
Sierra 2500 HD | 2016-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
Sierra 3500 HD | 2016-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Q: How to replace the LH exhaust heat shield on GMC Acadia?
A: The first step for heat shield replacement on the left side exhaust manifold is to remove the fuel injector sight shield. Remove the HO2S electrical connector from its harness electrical connector on the engine. After that remove the engine wiring harness clip retention of the electrical connector. After removing the exhaust manifold heat shield bolts the technician should pull the heat shield upwards over the HO2S harness. After positioning the new exhaust manifold heat shield below the HO2S pigtail it should be fastened using exhaust manifold heat shield bolts while tightening them to 10 N.m (89 lb in). Return the engine wiring harness electrical connector to connect it with the HO2S electrical connector while adding the HO2S electrical connector retainer to the wiring harness clip followed by mounting the fuel injector sight shield.
Q: How to replace the LH exhaust heat shield on GMC Yukon?
A: The first step to replace a left side Exhaust Manifold heat shield requires removing the left wheelhouse liner. Start by removing both bolts securing the Exhaust Manifold heat shield and then extracting the shield from the Exhaust Manifold. The new heat shield installation should start by fitting it onto the Exhaust Manifold and following up with heat shield bolt placement and tightening to 9 nm (80 lb in). Reinstall the left wheelhouse liner as the last step.
Q: How to replace the Exhaust Heat Shield on the right side for 4.8L, 5.3L, 6.0L, and 6.2L engines on GMC Sierra 1500?
A: The Exhaust Manifold heat shield replacement on the right side of 4.8l, 5.3l, 6.0l, 6.2l engines requires starting with right wheelhouse liner removal. You must first remove both bolts securing the Exhaust Manifold heat shield then detach the shield from the Exhaust Manifold. Vehicle components should be handled with care while working on fasteners to avoid damaging the vehicle. The new Exhaust Manifold heat shield should be positioned onto the Exhaust Manifold before you torque its heat shield bolts to 9 nm (80 lb in). The right wheelhouse liner must be replaced after completing the installation.