Make sure this part fits

GM 15920886
Heat Shield

2007-2019 GM

Customer Questions & Expert Answers (12)
GM 15920886 Heat Shield
  • Part Description
    Shield, Exhaust Tail Pipe
  • Position
    Front Center
  • Replaces
    15260249
  • Manufacturer
    General Motors
Make sure this part fits
$19.22 MSRP: $28.59
You Save: $9.37 (33%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2018 Chevrolet Silverado 1500Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2019 Chevrolet Silverado 2500 HDHigh Country, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2019 Chevrolet Silverado 3500 HDHigh Country, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2018 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2019 GMC Sierra 2500 HDBase, Denali, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2019 GMC Sierra 3500 HDBase, Denali, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15920886 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15920886 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Which procedures should be followed for removing the wheelhouse panels for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Follow the procedures for the Front Wheelhouse Liner Replacement - Right Side (Chevrolet), Front Wheelhouse Liner Replacement - Right Side (GMC), and Front Wheelhouse Liner Replacement - Left Side (Chevrolet).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after attaching the exhaust heat shield for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the exhaust heat shield nuts and tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed after raising the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the exhaust heat shield nuts and both wheelhouse panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust manifold heat shield on the right side for the 4.3L engine for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, remove the spark plug wires and reposition them out of the way if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the left side exhaust manifold heat shield (4.3L) for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    First, remove the spark plug wires and reposition them out of the way if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the new exhaust manifold heat shield be positioned for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Position the new exhaust manifold heat shield onto the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the spark plug wires for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Next, take out the exhaust manifold heat shield bolts and the heat shield from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new heat shield for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Position the exhaust manifold heat shield onto the exhaust manifold and install the heat shield bolts, tightening them to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installation for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the new heat shield for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the right wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield 15920886 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15920886 Heat Shield is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15920886 Heat Shield fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 3500 HD models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 3500 HD models.
The original GM component designated by manufacturer part number 15920886 maintains top performance when functioning as the Shield, Exhaust Tail Pipe unit at its Front Center. The component 15920886 is constructed from durable material and its dimensions span 61.5 x 5.6 x 17.0 inches while weighing 2.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15920886 has available replacement options 15260249. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.