ChevyParts
My Garage
My Account
Cart
OEM 2006 Buick LaCrosse Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Antenna Cables found
Product Specifications- Other Name: Cable, Radio Antenna; Cable
- Replaces: 15226904, 19116487
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.6 x 13.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25862201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.8 x 13.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15265905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly, Digital Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.5 x 12.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19116486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Buick LaCrosse Antenna Cable
With a comprehensive array of OEM 2006 Buick LaCrosse Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick LaCrosse Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Buick LaCrosse Antenna Cable Parts Questions & Experts Answers
- Q: How to Replace an Antenna Cable on 2006 Buick LaCrosse?A: In order to replace the Antenna Cable, one is required to remove the rear and seat cushion and rear seat back, followed by the removal of left rear lower quarter panel and the left upper quarter trim panel. To remove the rear of the headliner latch it underneath and disconnect the Antenna Cable from the radio antenna module. Next remove the lower center pillar trim panel and the left lower pillar garnish molding. Shift the carpet to get the access to the Antenna Cable and body harness where necessary. Unclip the Antenna Cable to the antenna extension cable and cut off the ends visible of the Antenna Cable from the wiring harness at the lower pillar garnish molding and rear header area. To record, fasten the Antenna Cable with the vehicle using electrical tape and secure the wiring harness at least every 150 mm (6 in). Connect the Antenna Cable to antenna extension cable,then re-install the carpet lower center pillar trim panel and lower pillar garnish molding to the left side. The next step is to reconnect the Antenna Cable to the radio antenna module, and to the headliner, the left rear upper quarter trim panel, the left rear quarter lower trim panel, rear seat back, and the last step would be to reconnect the rear seat cushion.
Related 2006 Buick LaCrosse Parts
2006 Buick LaCrosse Speedometer
2006 Buick LaCrosse Air Bag Sensor
2006 Buick LaCrosse Antenna
2006 Buick LaCrosse Antenna Base
2006 Buick LaCrosse Body Control Module
2006 Buick LaCrosse Headlight Switch
2006 Buick LaCrosse Ignition Coil
2006 Buick LaCrosse Ignition Control Module
2006 Buick LaCrosse Ignition Switch
2006 Buick LaCrosse Instrument Cluster
2006 Buick LaCrosse TPMS Sensor
2006 Buick LaCrosse Turn Signal Switch