How to replace the front wheel speed sensor on 2006 Buick LaCrosse?

When you replace the front Wheel Speed Sensor, know that the wheel speed sensors and their rings are a part of the hub and bearing assemblies. For that reason, replacing a speed sensor or ring calls for replacing the entire hub and bearing assembly, because the harness pigtail is part of the sensor and is not meant to be serviced by itself. Take off the old hub and bearing assembly first, and then set the new one in place on the vehicle. Then, turn the key to on without starting the engine and run the diagnostic check using the right method for the car.

OEM 2006 Buick LaCrosse Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

View related parts
2006 Buick LaCrosse Yaw Sensor Part Number: 10389131
Product Specifications
- Other Name: Sensor, Hydraulic Suspension; Sensor, Suspension
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 3.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10389131
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2006 Buick LaCrosse Wheel Speed Sensor

With a comprehensive array of OEM 2006 Buick LaCrosse Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick LaCrosse Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick LaCrosse Wheel Speed Sensor Parts and Q&A

Q: How to replace the front wheel speed sensor on 2006 Buick LaCrosse?
A: When you replace the front Wheel Speed Sensor, know that the wheel speed sensors and their rings are a part of the hub and bearing assemblies. For that reason, replacing a speed sensor or ring calls for replacing the entire hub and bearing assembly, because the harness pigtail is part of the sensor and is not meant to be serviced by itself. Take off the old hub and bearing assembly first, and then set the new one in place on the vehicle. Then, turn the key to on without starting the engine and run the diagnostic check using the right method for the car.