OEM 2006 Buick Rendezvous Fuel Filler Hose

2006 Buick Rendezvous Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2006 Buick Rendezvous?

  A: According to maintenance procedures the first step when replacing the Fuel Filler Hose requires reducing fuel system pressure with accurate cleaning required throughout fuel system component servicing. You must first drain the Fuel Tank by taking off its fuel filler cap. Lift up the vehicle while holding it secure and remove both fuel filler pipe nuts along with the fuel filler pipe bolt . Begin by untightening the fuel filler pipe clamp to release the fuel filler pipe hose connection with the Fuel Tank. Then remove the vent pipe near the fill pipe hose. Extract the fuel filler pipe from the pocket of the fuel filler section. Installation procedures include putting the fuel filler pipe into the fuel filler pocket while joining the vent pipe nearby the fill pipe hose. Seam the fuel filler pipe to the Fuel Tank while making sure it reaches its complete seating position. Start by tightening the clamp to 2.5 n.m (22 lb in) before securing the fuel filler pipe bolt to 25 n.m (18 lb ft) along with the fuel filler pipe nuts to 6 n.m (53 lb in). Reduce the vehicle height while filling the Fuel Tank and placing the fuel cap properly back on. Proceed with connecting the negative Battery Cable after checking for leaks by operating the ignition twice for short periods followed by observations for any signs of leakage.