OEM 2005 Buick Rendezvous Fuel Filler Hose

2005 Buick Rendezvous Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2005 Buick Rendezvous?

  A: The replacement of a Fuel Filler Hose needs three initial steps which include fuel system pressure relief then work with a clean surface on all fuel system components. Safely remove the fuel filler cap until all fuel flows out from the tank. First raise the car then remove the fuel filler pipe attachment between the wheelhouse stud with the attaching nut followed by attachment between wheelhouse panel and screw. Tighten the fuel filler pipe clamp to open the fuel filler pipe and proceed to remove it from the Fuel Tank. Then detach the grommet connected to the fuel filler pocket. Position the fuel filler pipe through the grommet on the fuel fill pocket before fixing it to the Fuel Tank with complete seating. Fasten the fuel filler pipe clamp to 2.5 n.m (22 lb in) while you install the fuel filler pipe attaching screw to the wheelhouse panel by tightening it to 25 n.m (18 lb ft). After you should install the wheelhouse panel fuel filler pipe attaching nut and secure it to 25 n.m (18 lb ft). Complete the task by first lowering the vehicle after which you must refill your Fuel Tank before you fasten the fuel filler cap in place. Turn on your ignition for 2 seconds before waiting 10 seconds to turn it off. Then, turn on the ignition again to inspect for fuel leaks.