How to replace the engine oil pressure switch on 2006 Buick Rendezvous?

To change the engine oil pressure sensor or switch, one needs to raise and then support the vehicle, first. Line up the retaining cap and screw it into the threads of the oil pressure sensor while you hold the engine harness electrical connector disconnected from the oil pressure switch; remove the engine oil pressure switch. In installation, remember to install engine oil pressure switch and tighten it at 16 Nm (12 ft. lbs.), installation). Then, connect the engine harness electrical connector to the oil pressure switch while finally, lower the vehicle.

OEM 2006 Buick Rendezvous Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2006 Buick Rendezvous Pressure Switch
Part Number: 12635954
$30.52 MSRP: $50.28
You Save: $19.76 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Engine Oil Pressure Indicator; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Switch, Engine Oil Pressure/Temperature
- Replaced by: 19436252
- Replaces: 12575007, 25036853
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635954
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

2006 Buick Rendezvous Oil Pressure Switch

With a comprehensive array of OEM 2006 Buick Rendezvous Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the engine oil pressure switch on 2006 Buick Rendezvous?
A: To change the engine oil pressure sensor or switch, one needs to raise and then support the vehicle, first. Line up the retaining cap and screw it into the threads of the oil pressure sensor while you hold the engine harness electrical connector disconnected from the oil pressure switch; remove the engine oil pressure switch. In installation, remember to install engine oil pressure switch and tighten it at 16 Nm (12 ft. lbs.), installation). Then, connect the engine harness electrical connector to the oil pressure switch while finally, lower the vehicle.